707299
31
Zoom out
Zoom in
Previous page
1/49
Next page
31
Switches
Channel/Slot
This determines what channel or effects slot of a multi you are viewing.
You can also use this to select what patch in the multi the switch controls
when making a Custom layout (see Custom Control Mode above)
Parameter or CC When Type is set to VST Param, this is the parameter for a plugin in VIP
that is controlled by the switch. When Type is set to MIDI CC, this is the
MIDI CC number for a parameter in your DAW that the switch controls.
Min / Max These determine the lowest (Min) and highest (Max
)
values. The available
range is 0%100%.
Type
This determines whether the switch controls a parameter for a plugin in
VIP (VST Param) or sends a MIDI CC message to your DAW.
Steps When Mode is set to Step, this determines the total number of steps. The
available range is 2200.
Mode This determines whether the switch’s operation is Toggle, Momentary, or
Step:
Toggle: Each time you press the switch it will turn on or off and
remain in that state until you press it again.
Momentary: The switch will be on for as long as you are holding it
down. It will turn off when you release it.
Step: The full range of the switch’s parameter (minimum value to
maximum value) will be divided into a number of “steps.” Each time
you press the switch, the value will increase by one step. Once it’s at
the maximum value, press the switch once more to reset it to the
minimum value.
For example, if the parameter’s range is 0% to 100% and the range
is divided into 20 steps, pressing the switch each time will increase
the value by 5% (Step 1/20). When the value is at 100% (Step
20/20), pressing the switch once will return it to 0% (Step 0/20).
Important: These Mode operations will be reversed if Reverse is set to
On.
Reverse This determines whether the switch’s polarity is normal (Off
)
or inverted
(On).
Pads
Important:
In VIP, the pads’ parameters are global. In other words, the pads’ MIDI note and channel
assignments are not associated with a specific plugin or patch.
The pads’ colors will change depending on what bank is currently selected.
Transp
The pad will be transposed by this many semitones up or down. The
available range is -36 to +36. 0 indicates the center (no transposition).
MIDI Ch
This is the MIDI channel over which the pad will send its MIDI note when
you press it. You can select any one of Channels 116.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Audio CTRL49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Audio CTRL49 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Audio CTRL49

M-Audio CTRL49 Quick start guide - English, German, French, Italian, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info