586987
12
Zoom out
Zoom in
Previous page
1/36
Next page
Page 12
Quick Audio Test
The installation of your LynxONE can be tested using the LynxONE Mixer and the
Sound Recorder application that ships with Windows 95/98 and Windows NT. Any
other audio application capable of audio recording and playback can be used in a
similar manner.
1. Connect a stereo analog signal source to the LEFT IN and RIGHT IN connectors
on the Audio cable.
2. Connect the LEFT OUT and RIGHT OUT connectors to an amplifier or mixer
capable of delivering an audio signal for listening via headphones or speakers.
3. Open the LynxONE Mixer by double clicking on the mixer icon.
4. In the LynxONE Mixer, set the Trim to either +4 dBu or -10 dBV to match the
signal level of the connected equipment.
5. In the LynxONE Mixer, set the Monitor Source to Analog In (this is the default
setting). Click on the Monitor button on the Analog Out panel to enable analog
input monitoring. You should hear the signal from the audio source which is
connected to the analog inputs. If this is not the case, check your connections.
Note, in this monitoring mode the peak level meters in the LynxONE mixer do not
operate.
6. Disable input monitoring by again clicking on the Monitor button on the Analog
Output panel. After doing so, this button should look like it is in the “out” or non-
depressed position.
7. Start Sound Recorder by clicking Start > Programs > Accessories > Multimedia >
Sound Recorder. Position Sound Recorder on your screen so it be easily viewed
along with the LynxONE Mixer.
8. In Sound Recorder, select the LynxONE’s audio devices by opening the Edit menu
and selecting Audio Properties. Select LynxONE Analog Out as the Preferred
device for playback and LynxONE Analog In as the Preferred device for recording.
9. Record a short sample by clicking the red record button followed by the stop
button in Sound Recorder. During recording, you should observe a graphic display
of the waveform being recorded in the center display in Sound Recorder. You
should also see activity on the Analog In peak meters of the LynxONE Mixer.
10. Playback the test sample by clicking the play button in Sound Recorder. During
playback, you should observe a graphic display of the waveform being played in
Sound Recorder. You should also hear the recorded audio and see activity on the
Analog Out peak meters of the LynxONE Mixer.
If the test did not operate as described or you received any errors, please refer to the
“Troubleshooting” section of this manual.
Using Your LynxONE
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx ONE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx ONE in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info