587003
26
Zoom out
Zoom in
Previous page
1/32
Next page
Page 23
9.1.2.2 Per Channel Routing
In addition to global routing, an LT-MADI equipped Aurora is capable of routing MADI streams
to Aurora Analog and Digital outputs on a per-channel basis. MADI streams can also be
duplicated across multiple Aurora outputs. For instance, MADI input 1 and 2 can be routed to
Analog outputs 7 and 8, while MADI inputs 3 and 4 can be routed to Analog outputs 5 and 6
AND Digital out 1 and 2 at the same time.
Per-channel routing can only be initiated from the Aurora Remote Control software. The Aurora
Remote Control (ARC) application allows control of Aurora parameters from a convenient
software interface. It also provides accurate real-time metering for the Analog and Digital inputs
and outputs.
The ARC software can operate on an OSX or Windows PC computer via a Lynx AES16 audio
interface or MIDI. The software is available on the Lynx Installation CD, or can be downloaded
from www.lynxstudio.com
> Support > Downloads.
9.1.2.2.1 Aurora Remote Control Software
The Aurora Remote Control (ARC) application allows control of Aurora parameters from a
convenient software interface. It also provides accurate real-time metering for the Analog and
Digital inputs and outputs.
After installation, the ARC can be run from the “Lynx Studio Technology” program group on a
Windows machine, or from “Applications” on an OSX installation.
The Aurora Remote Control Application allows the user to control output levels, route inputs to
outputs, change parameters, and view accurate meters for inputs and outputs on a connected
Aurora. Most parameter changes will be reflected both on the Aurora front panel and within the
software application.
Global routing can be set identically from the Aurora front panel or from the ARC application.
The selections available for TO ANALOG OUT and TO DIGITAL OUT are “ANALOG IN”,
“AES IN” and “LSLOT IN”. Additionally these buttons can be set to “Remote” mode by
pressing the appropriate button until the LEDs for all three choices are illuminated or by
selecting “Remote” as the source from within the ARC Digital I/O and Settings page.
In “Remote” routing mode, the Volume faders in the ARC become active, and audio signals can
be routed on a per-channel basis. Routing and volume controls for the Analog Outputs are
initiated from the “Analog I/O” page, and for the AES/EBU Digital Outputs from the “Digital
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx LT-Madi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx LT-Madi in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info