587003
25
Zoom out
Zoom in
Previous page
1/32
Next page
Page 22
9.1.2 Input Routing
Signals from MADI inputs can be routed to Aurora Analog and/or AES/EBU Outputs. The
Aurora will need to be configured for this routing scheme and will not operate this way in its
default state. Input routing can be set globally from the Aurora Remote Control software or from
the Aurora front panel.
Additionally, input routing can also be initiated by the user on a per-channel basis with the
Aurora Remote Control software.
9.1.2.1 Global Routing
Global routing is achieved from the Aurora Remote Control software or from the Aurora front
panel. From the front panel, the buttons labeled TO ANALOG OUT and TO DIGITAL OUT are
where appropriate routing would be established. Since the LT-MADI is an LSLOT device,
Choosing “LSLOT In” as the Source for TO ANALOG OUT would route signals from MADI
inputs to the Aurora’s Analog outputs. Choosing “LSLOT In” as the Source for TO DIGITAL
OUT would route signals from MADI inputs to the Aurora’s AES/EBU DIGITAL outputs.
This setting will be affected by the 16/32-channel mode states for an Aurora 16. In 32-channel
mode, MADI inputs 1-16 will route to Analog outputs 1-16. MADI inputs 17-32 would route to
Aurora Digital outputs 1-16.
In 16-channel mode, if the LT-MADI card is set to “ANALOG”, then signals sent to the 16
MADI inputs will be routed to the Aurora’s Analog outputs, and signals sent to the Aurora’s
Digital inputs will not. Conversely, if the LT-MADI card is set to “DIGITAL”, then signals sent
to the 16 Digital inputs will be routed to the MADI outputs, and signals sent to the Analog inputs
will not.
With an Aurora 8, MADI inputs 1-8 will be sent to the Aurora’s Analog outputs, and MADI
inputs 9-16 will be sent to the Aurora’s Digital outputs.
The following chart will detail global LT-MADI Input routing with the various configurations of
an Aurora 8 or Aurora 16
Unit
16/32
channel
mode
Digital or
Analog
mode
MADI
Inputs 1-8
Route to
MADI
Inputs 9-16
Route to
MADI
Inputs 17-
24 Route to
MADI
Inputs 25-
32 Route to
Aurora 16
32-Channel
Mode
N/A
Analog
Out 1-8
Analog
Out 9-16
Digital Out
1-8
Digital Out
9-16
Aurora 16
16-Channel
Mode
SW4 switch
= Analog
Analog
Out 1-8
Analog
Out 9-16
N/A N/A
Aurora 16
16-Channel
Mode
SW4 switch
= Digital
Digital
Out 1-8
Digital
Out 9-16
N/A N/A
Aurora 8 N/A N/A
Analog
Out 1-8
Digital
Out 1-8
N/A N/A
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx LT-Madi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx LT-Madi in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info