587003
18
Zoom out
Zoom in
Previous page
1/32
Next page
Page 15
With this number of influential factors, there are a significant number of possible combinations.
A key element to multi-Aurora configurations is correctly setting the Unit ID switch on each LT-
MADI card.
7.4.1 Unit ID Switch
When multiple Auroras are daisy chained via MADI, it is essential that they each occupy unique
positions in the MADI stream. MADI is a serial medium, so devices in a MADI daisy chain will
be mounted in a sequential fashion. The Unit ID switch on each LT-MADI card determines the
order in which devices are integrated into the MADI stream.
The Unit ID is determined by the position of the SW1 and SW2 switch on the LT-MADI card. It
is possible to set this switch after the card is installed, although there should be no AC power to
the Aurora when this modification is made.
The unit ID should also correspond to the physical position of each unit in the daisy-chain. For
instance, the output of Unit 0 should connect to the input of Unit 1. The output of Unit 1 should
connect to the input of Unit 2, etc. For a system that is used in different settings, it is important
to make note of the device IDs for each Aurora so that they are not connected in the wrong order.
Switch 3 toggles the delay compensation on or off. Delay Compensation should be ON whenever
more than one Aurora is used in a MADI daisy-chain (see section 7.4.2), and OFF whenever a
single Aurora is used. The table below will describe the pertinent switch settings:
SW1 SW2 SW3 UNIT_ID SWITCH
ON ON OFF Single Aurora
1 2 3 4
ON C&K SDA04
Back of Aurora
ON ON ON Device 0
1 2 3 4
ON C&K SDA04
Back of Aurora
OFF ON ON Device 1
1 2 3 4
ON C&K SDA04
Back of Aurora
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx LT-Madi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx LT-Madi in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info