587003

Lynx LT-Madi Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
Page 12
7.2 LT-MADI 16/32-channel modes
When used with some LSLOT expansion cards like the LT-MADI, an Aurora 16 can be
configured to operate as a 16-channel or a 32-channel device, depending on your ultimate I/O
needs. 16-channel mode is ideal for streaming audio via MADI to the Auroras Analog I/O OR
AES I/O, but not both. In contrast, 32-channel mode provides access to all AES/EBU and
ANALOG channels on the Aurora, simultaneously and independently.
7.2.1 16-channel mode
In 16-channel mode, the LT-MADI extracts 16 audio channels from the incoming MADI stream
and sends them to the Analog and AES outputs simultaneously. The signals are mirrored so that
signals delivered to Analog Output 1 would also be sent to AES Output 1.
For the outgoing MADI Stream, the LT-MADI card can be set to route audio from the Analog
inputs OR the AES inputs, but not both at the same time. Selecting Digital Inputs or Analog
Inputs is done with SW4 switch on the LT-MADI card. See below:
SW4 Selection when in 16-channel mode SWITCH
OFF DIGITAL INPUT
1 2 3 4
ON C&K SDA04
Back of Aurora
ON ANALOG INPUT
1 2 3 4
ON C&K SDA04
Back of Aurora
The Analog/Digital selection is global. You cannot, for instance, send 8 channels from the
Analog inputs and 8 channels from the AES inputs to the MADI outputs.
Note: this switch is only applicable for an Aurora 16 set to 16-channel mode, and is not pertinent
for use with an Aurora 8 or an Aurora 16 set to 32-channel mode.
7.2.2 32-channel mode
In 32 channel mode and device ID 0, the LT-MADI is capable of routing 32 audio channels from
the incoming MADI stream and sending channels 1-16 to the Aurora Analog outputs, and
channels 17-32 to the AES outputs. Similarly, the signals from the Analog Inputs can be routed
to MADI Outputs 1-16, and signals from the AES Inputs can be routed to MADI outputs 17-32
(note that if the LT-MADI has device ID 1, then the corresponding MADI channels will be 33-
48 and 49-64).
As an example, a signal sent to MADI input channel 3 will be delivered to Aurora analog output
3, whereas a signal sent to MADI input channel 18 will be delivered to AES Output 2
(sometimes labeled 1R). See Section 9: Routing and Channel Mapping
for more information.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx LT-Madi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx LT-Madi in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info