586998
53
Zoom out
Zoom in
Previous page
1/56
Next page
53
In the computer BIOS, disable CPU Speedstep (sometimes labelled as EIST, or
Intel Speedstep)
In the computer BIOS, disable C States (sometimes split out as C1, C3, C6, etc.)
2. If this behavior happens after pausing a multimedia playback app with Windows, make
sure that you are using driver build 22 or above.
3. Make sure there are not any background tasks that are causing the behavior, such as anti-
virus software, scheduled tasks, or automatic updates.
There is no signal from the Digital Inputs or Digital Outputs
1. Make sure that the format for the digital I/O matches the format of the connect device.
The E22/E44 digital I/O can be set to AES or SPDIF. See Section 5.1: Hardware Installation
2. On an E22 the Digital Output defaults to Lynx Play 3+4 as the selection in your audio
software. The Digital Input is Record 3+4. On an E44, the Digital Outputs are Play 5-8, and
the Digital Inputs are Record 5-8. Make sure that the correct device is selected in your audio
software for input or output
3. Make sure that the external digital device is powered up and cables from the Lynx card
are connected into the correct ports (i.e. Lynx “Out” to Device’s “In”, and vice versa).
The Sample rate in the Lynx Mixer does not match the sample rate of the audio
material being played:
If the card is operating on “Internal” as a CLOCK SOURCE, you must manually select the
rate through either the audio application settings page, or globally through the OS’s sound
control settings. With “External” (word clock) or “Digital In” clocking you must also set the
sample rate to the desired rate on the clock master device. Otherwise, the playback streams
may be sample rate converted by the operating system, compromising playback quality.
Please see Section 5.4: Clock Settings and Connections for more information.
If the card is operating on Internal, and there is a sample rate discrepancy, check the OS
default sample rate and see if that is where the discrepancy exists. In Windows, this can be
established in the Sound Section of Control Panel, after selecting a device click Properties >
Advanced > Default Format. In OSX, this would be established from Utilities > Audio MIDI
Setup. Select the device and then the sample rate in the right pane.
Also, check in the Lynx Mixer and make sure that Rate Lock from the Adapter page is NOT
selected.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx E44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx E44 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info