586998
51
Zoom out
Zoom in
Previous page
1/56
Next page
51
Connections
Audio Port Bracket-mounted 25-pin female D-sub connector for analog audio In/Out
Sync Port Bracket-mounted 15-pin high-density female D-sub connector for digital input and output, word
clock in and out
Cables (Optional)
E44 Audio Cable 25-pin male D-sub to 4 male and 4 female XLR connectors on six-foot shielded twisted pair
cabling (part # CBL-L2Audio-A)
E44 Sync 15-pin high-density male D-sub to (2) male and (2) female XLR on six-foot shielded twisted pair
cabling and (2) female BNC connectors on six-foot 75 ohm coaxial cabling (part # CBL-ESYNC)
E22 Audio Cable 25-pin male D-sub to 2 male and 2 female XLR connectors on six-foot shielded twisted pair
cabling (part # CBL-L22Audio)
E22 Sync 15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair
cabling and (2) female BNC connectors on six-foot 75 ohm coaxial cabling (part # CBL-L22Sync)
Software
Windows Drivers Windows 7 / 8: MME / DirectSound / WASAPI (WaveRT); ASIO 2.3
Macintosh Drivers Core Audio for OS X 10.8 and higher.
Lynx Mixer Application Provides complete control of digital mixer and all hardware settings.
General
PCI Express Bus 1x
Data Transfers Highly efficient Lynx V2 DMA engine; bus mastering
Power +3.3V @ 630 mA, +12V @ 500 mA
Size 5.0” H X 7.4” W X 0.75” D (half-size PCI Express card)
Shipping Weight 1 pound
Certifications CE and FCC Class B
RoHS Certified
10 Troubleshooting
The E22/E44 does not show up in the Operating System as a usable device:
1. Verify that the card has been installed correctly and is securely seated in the slot. You
may also want to try installing the card into a different slot.
2. Verify that you are using a compatible Operating System. See Section 2.2: Operational
requirements
3. With a proper installation, the LED on the back edge of the board can give diagnostic
information. There are four possible states for this LED:
LED Bright: Card is functioning and driver is successfully installed
LED DIM: Firmware is not functioning. Reprogramming firmware or setting card to
PROM 1 are suggested troubleshooting steps. See Section 8.4: Updating Firmware
LED Flashing: This indicates that the driver has not been properly loaded. Try re-
installing driver, installing a different driver version (downloaded from the Lynx
website), or investigating if there is a conflict with another piece of hardware in the
system. Also, consider moving the card to a different PCIe slot if one is available.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx E44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx E44 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info