587002

Lynx Aurora LT-TB Manual

30
Zoom out
Zoom in
Previous page
1/55
Next page
30
section can be “hidden” by clicking the RECORD button in the Lynx Mixer Toolbar. When
the section is hidden, all of the settings are still active. Clicking the RECORD button again
will make the section visible again.
Some of the controls and displays here are pertinent to the hardware inputs themselves, and
some are specific to the hardware monitoring settings for that input. We will look in detail at
each control.
Input Source selection
This button reveals which physical input is assigned to the corresponding Record Device at
the bottom of the pane. The default configuration is for Analog Input 1 to be assigned to
Record 1, Analog Input 2 assigned to Record 2, etc. With an Aurora 8, Record Devices 9-16
are assigned to Digital Inputs 1-4 (the Digital Inputs have a stereo orientation, and appear as
Digital In 1 Left + Digital In 1 Right, etc.). For an Aurora 16, when in 16 channel mode only
the Analog Inputs are assigned by default. In 24-channel mode, Record Devices 17-24 are
assigned to Digital Inputs 1-4. In 32-channel mode, Record Devices 17-32 are assigned to
Digital Inputs 1-8.
Input names are abbreviated so that they can appear in 4 spaces. Sources that start with “A”
are for Analog and with “D” are for Digital. For instance, “AIn4” means Analog Input 4,
“DI4L” means Digital In 4 Left (Note: digital inputs have a stereo orientation, analog have a
mono orientation).
Clicking the Input Source button generates a menu with all of the Analog and Digital Inputs
available to choose from. For the vast majority of users the default configuration is ideal and
would never be changed. There are a few reasons why assigning inputs other than the
defaults may be beneficial:
Assigning the same physical input (i.e. Analog In 1+2) to multiple Record devices
can allow the user to record the same signal into two different programs or onto
two different tracks within the same program
If the Digital Inputs are being used primarily and not the Analog Inputs, It can be
useful to assigning the first record devices to the Digital Inputs instead of Analog,
so that they appear first in the list
If using one pair of analog ins, and one pair of digital ins, is the typical working
method, then having those be in adjacent Record Devices can be convenient
When an input source button shows a Digital Input, the button will be Green when that Input
is locked to a valid digital signal, or it will appear as Red when no clock signal is present.
Pan Pot
The Pan Pot knob controls the pan position of the input as it is being monitored through an
output. IT HAS NO EFFECT ON THE RECORDED SIGNAL. It is only pertinent to
monitoring.
Hardware, no latency input monitoring is implemented by clicking on a physical output
button at the bottom of the mixer screen. For instance, in the screen picture below, Analog
Out 1 and 2 have been selected (Output selection is always done with stereo pairs):
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Aurora LT-TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Aurora LT-TB in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info