586986

Lynx Aurora 8 Manual

7
Zoom out
Zoom in
Previous page
1/32
Next page
Page 5
2 Operational Overview
2.1 Front Panel Controls and Indicators
The Aurora allows extensive parameter selection and configuration from convenient front panel
controls. For standalone use, or in situations where computer control is not possible, it is important to
be thoroughly familiar with the front panel controls and display. If the correct parameters are not
selected, it is possible to damage connected equipment.
FRONT PANEL
(pictured Aurora 16)
q SAMPLE RATE
This button selects sample rate when the Aurora is set to Internal for SYNC SOURCE. Standard
rates from 44.1 kHz to 192 kHz are available. When the Aurora is slaving to an external clock source,
the LED for the measured sample rate will illuminate. Holding the SAMPLE RATE button while
connecting AC power to the Aurora will restore all settings to the factory default state. PLEASE
NOTE: After the defaults are restored, the unit must be put into standby mode to save the settings
before power is removed.
w SYNC SOURCE
This button selects the clock source that drives the Aurora sample clock generator from the following
options:
INT Clock derived from the on-board crystal oscillator.
EXT Clock signal from WORD CLOCK input.
EXT/2 Clock signal from WORD CLOCK input running at half the desired sample rate.
Typically used with dual-wire AES/EBU devices.
AES A Clock signal from the AES I/O Port A Digital Input. Clock is derived from the first valid
AES/EBU channel.
Aurora 8 Clock signal from the AES inputs 1-4
AES B Clock signal from the AES I/O Port B Digital Input. Clock is derived from the first valid
AES/EBU channel.
Aurora 8 Clock signal from the AES inputs 5-8
LSLOT Clock signal from an LSlot/LStream card installed into the LSLOT expansion port (i.e.
ADAT, Firewire, etc.).
If no clock signal is available for the SYNC SOURCE selected, the LED for the selected source will
flash.
e SynchroLock
This LED shows the status of the SynchroLock clocking system.
Flashing Working (analyzing incoming clock signal). It typically takes one to two minutes to
achieve final lock. The Aurora can be used prior to a locked state, but the jitter reduction
is significantly enhanced when lock is achieved.
Solid Locked. Ready to use.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Aurora 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Aurora 8 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info