586986
6
Zoom out
Zoom in
Previous page
1/32
Next page
Page 4
The Aurora’s analog I/O can be used with balanced or unbalanced line level devices operating at a
nominal trim level of +4dBu or –10dBV (switchable in banks of four channels). The analog outputs
are capable of delivering +20 dBu signal levels, it is important to verify that connected equipment is
capable of handling these signal levels to prevent clipping or possible damage. The Aurora 16-VT
models offer variable trim on all analog inputs and outputs.
1.7.2 Remote Control
In addition to front panel controls, the Aurora can be configured conveniently from the Aurora Remote
Control software installed on a PC or Macintosh computer. A forthcoming Remote Control manual
will detail the software installation and operation. To use the optional Remote Control software, one
of the following conditions must be met:
Via Lynx AES16/AES16e Audio Interface: A PC running Windows 2000/XP/7 or a Macintosh
running OSX with an installed and fully functional Rev B (or higher) Lynx AES16 Audio Interface or
any AES16e Interface. The AES16/AES16e would connect to the Aurora via the Lynx CBL-AES1605
cable or equivalent.
Via Lynx LT-TB Expansion card: A Mac or PC connected to an LT-TB equipped Aurora via
ThunderBolt.
Via Lynx LT-USB Expansion card: A Mac or PC connected to an LT-USB equipped Aurora via
USB 2.0 or 3.0. On Windows the LT-USB drivers will need to be installed and operational.
Via MIDI Interface: A PC running Windows 2000/XP/7/8 or a Mac running OSX with an installed
and fully functional MIDI interface. Attach a MIDI cable from the Aurora’s MIDI Out to the
interface’s MIDI In, and the Aurora 16’s MIDI In to the interface’s MIDI Out.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx Aurora 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx Aurora 8 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info