688764
22
Zoom out
Zoom in
Previous page
1/72
Next page
22
Personal safety equipment
Your device at a glance
P.3, item1
1. Rollers
2. Blower nozzle
3. Suction tube
4. Grip for front hand
5. On/Off switch
6. Speed regulator
7. Grip for rear hand
8. Adjustment lever (blowing, vacuuming)
9. Catch-sack
Scope of delivery
Instructions for use
Leaf blower/vacuum
Catch-sack
Shoulder strap
Assembly
P.3, item2
1. Fit the two suction pipes sections together and
screw tightly.
2. Insert the suction pipe into the device and screw
into place.
3. Hook the shoulder strap onto the device as
shown.
Operation
Check before starting!
Check the safety equipment and the safe condition
of the device.
Check all parts to make sure they fit tightly.
Check whether there are visible defects: broken
parts, cracks, etc.
Attaching the cuttings bag
P.4, item3
Hook the collecting sack into the device as
shown with the front side and fold up at the han-
dle (10).
Ensure that the bag has slotted into place
securely.
Attaching the extension cable
P.4, item3
Plug the unit plug into the connector of the
extension cable.
Feed the extension cable through the strain relief
mechanism(12) as shown.
Selecting the operating mode
Set adjustment lever(8) to vacuum[ ] or
blow[ ].
When using as a leaf vacuum: Insert the collec-
tion bag (9) as shown into the device and ensure
that it clicks into place (P.4, item3).
Setting the blower or vacuum speed
Set the speed regulator (6) to the required blow-
ing or vacuuming speed.
Switching on and off
Set the On/Off switch to position [1] to switch
the appliance on.
Set the On/Off switch to position [0] to switch
the appliance off.
Cleaning and maintenance
Cleaning the device
Brush off coarse dirt.
Wipe down the device with a slightly damp cloth.
Clean the catch-sack regularly
Removing the collecting sack
P.4, item3
Push the unlocking button (11) and fold the han-
dle (10) downwards.
Rectify clogging
P.4, item4
Release the locking screw (13).
Fold up the housing cover (14) and remove any
blockage.
Unplug the mains plug before performing
any maintenance!
Risk of injury caused by rotating machine
parts!
Risk of injury caused by rotating machine
parts!
When working with the device, wear eye
and ear protection.
Wear sturdy shoes when working with the
device.
Wear protective gloves when working with
the device.
Wear tightly fitting clothing when working
with the device.
DANGER! Risk of injury! The device must
only be put into operation if no faults are
found. If any part of the device is defective,
it must be replaced before the next use.
Note: Work with leaf blowers/vacuums
may not be performed during normal quiet
hours.
DANGER! Risk of injury! Switch off the
product and disconnect the mains plug
before all cleaning and maintenance work.
Wait till all moving parts are completely
stopped.
GB
Laubsauger_Elektro_115158.book Seite 22 Donnerstag, 10. November 2016 2:03 14
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lux Tools E-LS-2800-50 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lux Tools E-LS-2800-50 2 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info