Manual Lux Tools E-LS-2800-50 2 (page 21 of 72) (English, German, Dutch, French, Italian, Polish)

688764

Zoom out

Zoom in

1/72

The vibration values specified in the technical data

represent the main uses of the device. The actual

existing vibrations during use may deviate from

these as a result of the following factors:

• Incorrect use of the product;

• Unsuitable tools inserted;

• Unsuitable material;

• Insufficient maintenance.

You can reduce the risks considerably by following

the tips below:

– Maintain the device in accordance with the

instructions in the operating instructions.

– Avoid working at low temperatures.

– When it is cold, make sure your body and your

hands, in particular, are kept warm.

– Take regular breaks and move your hands at the

same time to promote circulation.

Electrical safety

• The device may only be connected to a socket

that is correctly installed and grounded.

• The fuse must be a residual current circuit-

breaker with a measured residual current of no

more than 30mA.

• Make sure that the power supply corresponds

with the connection specifications of the device

before it is connected.

• The tool may only be used within the specified

limitations for voltage and power (see type

plate).

• Do not touch the mains plug with wet hands!

Always pull out the mains plug at the plug and

not by the cable.

• Do not bend, crush, pull or drive over the power

cable, protect from sharp edges, oil and heat.

• Do not lift the device using the cable or use the

cable for purposes other than intended.

• Check the plug and cable before each use.

• If the power cable is damaged immediately dis-

connect the plug. Never use the device if the

power cable is damaged.

• If the device is not in use make sure the plug is

pulled out.

• Make sure that the device is switched off before

plugging in the mains cable.

• Make sure that the device is switched off before

unplugging it.

• Disconnect the power supply before transport-

ing the device.

Device-specific safety instructions

• When working with the device, always maintain

a safe distance and natural body position.

• Always hold the device firmly in both hands.

• Before starting to work, check the working area

for animals and objects. Remove all objects that

may be slung away or become jammed in the

cutting tool.

• Do not attempt to remove materials to be vacu-

umed or to hold material already vacuumed

when the motor is running. Only remove any

jammed material to be vacuumed when the

device is switched off.

• No other persons or animals may be present

within an area of 15 m around the vacuuming

area, as they may otherwise by injured by

objects being slung away.

• Only work in good light and vision conditions.

• Do not work above head height! Do not lean for-

ward or back!

• The operator must wear tightly fitting clothing.

Avoid wearing loose clothing. Wear sturdy shoes

and long trousers.

• Take care when walking backwards. Danger of

stumbling!

• Never work in the rain.

• Vacuuming, blowing of heavy materials such as

metal, stones, branches, fir cones or broken

glass is expressly forbidden.

• Keep all parts of your body away from the vac-

uum opening.

• When working with the device, ensure that there

is sufficient lighting.

• Always wear the required personal protective

equipment (►Personal safety equipment–

p.22)

• Be careful of the dust you have raised and flying

objects. Especially dangerous is the rebound

effect on walls or walls of houses.

• Do not direct the device at people or animals

when vacuuming or blowing.

• Before starting to blow, loosen foreign bodies

with a rake or broom.

• The machine may only be operated during sen-

sible hours– not too early in the morning or too

late in the evening, as it may disturb other peo-

ple.

• The times listed by the local authorities must be

adhered to.

• The whole blower nozzle piece must be used so

that the airstream can work close to the ground.

• Heed children, pets, open windows, and blow

the foreign bodies safely away.

• Remember that moving parts may also be

located behind ventilation and venting slots.

• Symbols which are on your device may not be

removed or covered. Notes on the device which

are no longer legible must be replaced immedi-

ately.

Be careful when handling the device! Ob-

serve all safety instructions in the instruc-

tions for use!

Read the instructions for use before use!

Do not subject the device to a humid envi-

ronment!

Maintain a safety distance!

Risk of injury due to flying parts!

Laubsauger_Elektro_115158.book Seite 21 Donnerstag, 10. November 2016 2:03 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lux Tools E-LS-2800-50 2 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lux Tools E-LS-2800-50 2 Manual

Product: