Manual Lux Tools CH-E-1800-40-H 2 (page 38 of 136) (English, German, Dutch, French, Italian, Polish)

688757

Zoom out

Zoom in

1/136

Maintenance and storage

• Ensure that all nuts, bolts and screws are

tightened and the tool is in a safe operat-

ing state.

• Check the grass collection equipment

regularly for wear or for loss of functional-

ity.

• For safety reasons, replace worn or dam-

aged parts.

• Remember that when using a tool with

multiple blades, moving one blade may

lead to the other blades rotating.

• When adjusting the machine, make sure

that no fingers are trapped between the

moving blades and fixed parts of the

machine.

• Allow the motor to cool down before you

put the machine away.

• When maintaining the blades, remember

that even if the power source is deacti-

vated, the blades can still be moved.

• For safety reasons, replace worn or dam-

aged parts. Only use original spare parts

and accessories.

The variant of the product sold in Switzerland

may only be used in Switzerland, as it is

equipped with a Swiss plug.

You can identify the variant by means of the

item number on the product (the instructions

always contain all item numbers):

• Item number Switzerland: 468 449,

468 604

• Item number in other EU countries:

106 542, 106 543, 106 544, 106 545

The device at a glance

► P. 3, item 1

1. Upper retaining bracket

2. Switch-on lever

3. Quick release lever

4. Lever (for cutting height adjustment)

5. Wheel left

6. Motor

7. Wheel (front)

8. Wheel (rear)

9. Cable grip

10. Cable clamp

11. Grass collector

12. Safety flap

13. Lower retaining bracket

14. Mains plug

15. Safety lock

Scope of supply

• Instructions for use

• Lawn mower

• Upper retaining bracket

• Lower retaining bracket

• Grass collector

• Bag with mounting material

Assembly

Mounting the lower retaining bracket

► P. 4, item 2

– Mount the lower retaining bracket(13) as

illustrated.

– Repeat the procedure for the other side.

Mounting the upper retaining bracket

► P. 4, item 3

– Mount the upper retaining bracket(1) as

illustrated.

– Repeat the procedure for the other side.

– Adjust the angle and fix using the quick

release lever(3).

– Attach the cable using cable clamp(10)

onto the lower retaining bracket(13).

Attaching the collecting sack

► P. 4, item 4

– Clip the rubber lip (16) of two sides of the

cloth grass collecting bag onto the wire

bar (17).

– Fully insert the rods of the wire bar into

the slots (18) on either side of the plastic

base of the grass collecting bag.

– There is a hole (19) in the bottom of the

grass collector to hang it up if required.

The grass collecting bag is also designed

to collapse into a compact size to reduce

storage when the lawnmower is not in

use.

DANGER! Risk of death through

electric shock! The use of this vari-

ant outside Switzerland is not per-

missible for safety reasons, as this

poses a risk of electric shock or fire.

WARNING! Risk of injury! Place the

product horizontally on a stable, suf-

ficiently load-bearing and level sur-

face.

Note: It must be possible to close

the quick release levers completely.

If necessary, slightly loosen the self-

locking nuts.

Rasenmaeher_106542_106543_106544_106545_468449_468604.book Seite 38 Donnerstag, 10. November 2016 1:57 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lux Tools CH-E-1800-40-H 2 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 4,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lux Tools CH-E-1800-40-H 2 Manual

Product: