Manual Lux Tools CH-E-1800-40-H 2 (page 36 of 136) (English, German, Dutch, French, Italian, Polish)

688757

Zoom out

Zoom in

1/136

• Avoid physical contact with grounded

surfaces, such as those of pipes, radia-

tors, cookers and refrigerators. The risk

of electric shock increases if your body is

earthed.

• Keep electrical tools away from rain and

wet. The risk of electric shock increases if

water penetrates an electrical tool.

• Switch off device in case of power inter-

ruption and pull mains plug. This prevents

the unintentional use of the use in case of

voltage return.

• Check whether the locking device is

locked and lock this if required in case of

power interruption and each setting of

the device. Otherwise the device may

start unexpectedly when the power is

supplied.

• Do not use the cable to carry the product,

hang it up or pull the plug out of the

socket. Keep the cable away from heat,

oil, sharp edges and any moving machine

parts. Damaged or tangled cables

increase the risk of electric shock.

• If the connecting cable becomes dam-

aged, it must be replaced by an expert.

• If you require to work with an extension

cable, this must be approved for this

application field and must have sufficient

cross-section. Otherwise power loss in

case of the device and overheating of the

cable may occur. If you are not certain,

contact a specialist.

• If you use an electrical tool outdoors, use

only extension cables suitable for out-

door use. Using an extension cable that is

suitable for outdoor use reduces the risk

of electric shock.

• When operating the electrical tool in a

damp environment cannot be avoided,

use a fault current circuit breaker with a

trip current of 30 mA or less. The use of a

fault current circuit breaker reduces the

risk of electric shock.

• Do not overload the product. Carry out

your work using only the electrical tool

intended. You will work more efficiently

and safely if you use the correct electrical

tool within its stated performance range.

• Do not use an electrical tool with a defec-

tive switch. A electrical tool that can be

no longer switched on or off is dangerous

and must be repaired.

• Pull the plug from the socket and/or

remove the rechargeable battery before

making adjustments, replacing compo-

nents or putting the device away. These

precautionary measures will prevent the

device from being started accidentally.

• Keep unused electrical tools out of the

reach of children. Do not allow the prod-

uct to be used by anyone who is not

familiar with it or has not read these oper-

ating instructions. Electrical tools are

dangerous if used by inexperienced per-

sons.

• Handle electrical tools with care. Check

that moving parts are functioning prop-

erly and do not stick, whether parts are

broken or have been damaged in a way

that impairs the function of the electrical

tool. Have the damaged parts repaired

before you use the product. Poorly main-

tained electrical tools are a common

cause of accidents.

• Use electrical tools, accessories, inter-

changeable tools etc. in accordance with

these instructions. In doing so, take

working conditions and the work to be

performed into consideration.

• Using electrical tools for applications

other than those intended can result in

dangerous situations.

• Remove the setting tools or spanners

before switching on the device. A tool or

spanner left in a rotating part of the prod-

uct can result in injury.

• Avoid unintentional operation. Make sure

that the device is switched off before it is

connected to the power supply and/or

battery, removed or carried. Carrying the

electrical tool with your finger on the

switch or connected to the power supply

can lead to accidents.

Safety instructions for lawn mowers

• Keep the power cable away from the

rotating blades. The blades can damage

the cable and result in an electric shock.

• Do not touch the rotating blades until the

product has been disconnected from the

mains and the blades have come to a

complete standstill.

• Always hold the product firmly in both

hands.

• Never work near garden ponds or swim-

ming pools.

• Pay attention to local regulations for rest

periods.

• Take care when walking backwards.

Danger of stumbling!

• Never leave the product unattended with

the motor running.

Rasenmaeher_106542_106543_106544_106545_468449_468604.book Seite 36 Donnerstag, 10. November 2016 1:57 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lux Tools CH-E-1800-40-H 2 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 4,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lux Tools CH-E-1800-40-H 2 Manual

Product: