719258

Lurch Green Power Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
5
Crank
Closing screw
Funnel/housing
Pressing screw bushing
Pressing screw
Nylon seal
Clamping screw
Outlet screw (for wheat grass)
Housing clamping knob
Base
Stuffer/lever
Juice container
Fixture
Sieve
Screw wrench
The juice extractor is delivered with two spare
seals.
ASSEMBLY AND OPERATING MANUAL
• Install the parts to inside the housing
(Note: The bushing of the pressing screw is al-
ready in the correct place).
• Push the housing onto the base (Fig. 1).
IMPORTANT
Pay attention that the nylon seal is in the cor-
rect place. The housing clamping knob must
be loosened before the housing can be mounted
on or removed from the base.
• Set the clamping screw on “Lock” and tight-
en the small outlet screw . (By tightening the
outlet screw you exert more pressure dur-
ing the juice extraction process (for leafy and
fibrous vegetables such as parsley and wheat
grass). This is not necessary for the majority of
fruits and vegetables.
You can also vary the distance between the
clamping screw and the pressing screw by
means of the enclosed screw wrench
in or-
der to increase or to decrease the extraction
pressure).
• We recommend that you secure the juice ex-
tractor with the fixture .
• Ensure that the assembly surface is clean and
dry.
• Place the juice extractor near the edge of the
table or the working surface.
• Fix the housing firmly by turning the hous-
ing clamping knob in clockwise direction
(Fig. 2). Use the stuffer/lever if necessary.
Mount the fixture if necessary.
• Position the crank at the rear end of the
pressing screw housing and tighten the closing
screw
on the crank .
• Place the juice container on the side of the
socket so that it catches the juice coming from
the spout.
• Place a bowl (not included) for catching the
pomace under the outlet screw .
• Put the fruits and vegetable into the funnel
, while turning the crank in the clockwise
direction (Fig. 4).
IMPORTANT
The foodstuff should be cut in small strips or
pieces and pushed slowly into the funnel. Here-
with, if possible, place the strips directly on the
right next to the pressing screw.
• If your encounter too much resistance, turn the
crank briefly in a counter-clockwise direction
and continue in the clockwise direction.
Do not use excessive force!
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lurch Green Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lurch Green Power in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info