599449
11
Zoom out
Zoom in
Previous page
1/16
Next page
| 11
StructureScan HD | Installation
Direct/Step Mount (No Bracket)
When using the direct mount installation shown below, you MUST
turn on the Flip Left/Right feature. Refer to your Operation manual
for more information..
Direct Step Mount Supplies (not included)
3/32 Drill bit (Direct/Step
mount pilot holes)
Marine grade above- or below-
waterline sealant
To use Direct Mount:
1. Make sure the boat’s step is the same length or longer than the StructureS-
can transducer.
2. After selecting a mounting location, route the transducer cable to the loca-
tion where the StructureScan module will be installed.
3. Hold the transducer in the desired position and then use a pencil to mark
pilot holes through the mounting holes on the transducer.
4. Drill the pilot holes.
5. Apply a high-grade above- or below-waterline sealant to the pilot holes.
6. Align the transducer mounting holes over the pilot holes and mount the
transducer to the step using self-tapping metal screws (not supplied). Do
NOT overtighten the screws; otherwise you could strip out the fiberglass
pilot holes or crack the mounting holes on the StructureScan transducer.
7. Connect the transducer cable to the StructureScan module and then turn
on the Flip Left/Right feature on your display unit.
Do not install
under boat hull!
Direct mount
(without bracket)
¼ NOTE: When using a Direct Step Mount, you must turn on the Flip
Left/Right feature in your display unit to ensure what is shown on
the left/right side on your display, corresponds with what is on the
left/right side of your boat.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance STRUCTURESCAN-HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance STRUCTURESCAN-HD in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance STRUCTURESCAN-HD

Lowrance STRUCTURESCAN-HD User Manual - English - 28 pages

Lowrance STRUCTURESCAN-HD User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info