599449
8
Zoom out
Zoom in
Previous page
1/16
Next page
8 |
StructureScan HD | Installation
Transom mount
The StructureScan transducer can be mounted just like a skimmer
transducer, where it is in the water when you are on plane or can be
mounted so it is only in the water, when you are moving at trolling
speed.
Transom Mount Supplies (not included)
1/8” Drill bit (Transom mount
pilot holes)
Marine grade above- or below-
waterline sealant
Transom Mount (Aluminum Hull) Supplies (not included)
M4 Machine Screws
Marine grade above- or below-
waterline sealant
Starboard (prevents corrosion between bracket and aluminum
hull)
To Mount StructureScan transducer on Transom:
1. Choose a transducer location and then route the transducer cable to the
location where the StructureScan module will be installed.
2. Place the transducer bracket against the transom and then align the bot-
tom of the transducer with the bottom of boat. Use a pencil to mark the
pilot holes through the slots in the transducer bracket.
3. Drill the pilot holes into the boat’s transom.
4. Apply a high-grade above- or below-waterline sealant to the pilot holes.
5. Align the bracket slots over the pilot holes and fasten the bracket to the
transom using your drill and the supplied screws.
6. To make adjustments to transducer position, loosen the screws and slide
bracket up or down.
7. Connect the transducer cable to the StructureScan module sonar port.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance STRUCTURESCAN-HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance STRUCTURESCAN-HD in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance STRUCTURESCAN-HD

Lowrance STRUCTURESCAN-HD User Manual - English - 28 pages

Lowrance STRUCTURESCAN-HD User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info