599447
12
Zoom out
Zoom in
Previous page
1/16
Next page
10 |
SpotlightScan | Installation Manual
5. Make sure the mounting surface is clean and dry. Clean the surface with
rubbing alcohol, if necessary.
6. Install the adhesive foam padding in the four cavities next to the cable
mount using the attached adhesive.
7. Position the plastic roller plate so it butts against the rib in front of the
hinge pin and against the cable mount, as shown above. Make sure the
textured side of the plate bonds securely with the adhesive on the foam
padding.
8. Pull the lever arm back and install the position sensor on the foot pedal
base using the attached adhesive.
9. Reinstall the base plate.
10. Connect the position sensor to your NMEA 2000 network.
The roller plate should be flush with the rib on the
housing and the side of the cable mount. The textured
side of the plate should be in contact with the foam pads.
The end of the roller
plate should butt
against this rib
Front view of installed roller plate.
The side of
the roller plate
should butt
against the cable
mount
The rib on the sensor should
grip this edge on the base
housing (side view).
The sensor should be flush
with the side of the base
housing (top view).
Install the sensor so the rib grips the edge of
the base housing. Make sure the side of the
sensor is flush with the side of the housing.
Roller plate
Lever arm
Roller plate
Lever arm
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance SpotlightScan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance SpotlightScan in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance SpotlightScan

Lowrance SpotlightScan User Manual - English - 12 pages

Lowrance SpotlightScan User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info