599447
10
Zoom out
Zoom in
Previous page
1/16
Next page
8 |
SpotlightScan | Installation Manual
10. Make sure the mounting plate is clean and dry. Clean the plate with
rubbing alcohol, if necessary.
11. Pull the lever arm back and align the position sensor on the mounting plate
using the attached adhesive strip.
Make sure the rib on the position sensor overlaps the widest angled
edge on the mounting plate.
12.
Connect the position sensor cable to your NMEA 2000 network.
Mounting plate view with pedal
turned right-side up.
Pull the lever arm back when
installing the position sensor on the
mounting plate.
The plate will be installed on the
base before the sensor is attached.
These images show only how the
sensor fits on the plate.
Rib
Rib
The rib must be flush
with the top edge of
the mounting plate.
The rib must
butt against the
alignment tab.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance SpotlightScan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance SpotlightScan in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance SpotlightScan

Lowrance SpotlightScan User Manual - English - 12 pages

Lowrance SpotlightScan User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info