599325
5
Zoom out
Zoom in
Previous page
1/93
Next page
1
FRONT
SLOT BREAK
OUT SLOT
You will need to drill a hole in the dash for the power and transducer cables.
The smallest hole that will pass one power or transducer plug is one inch.
After the hole is drilled, pass the transducer connector up through the hole
first, then pass the power cable down through it.
After the cables have been routed, fill the hole with a good marine sealing
compound. Offset the bracket to cover the hole. Route the power cable
through the slot and break out one of the other slots in the bracket for the
transducer cable.
INTRODUCTION
The LMS-350A is a high quality, wide screen sonar with performance that
is second to none in its class. Using menu features and “soft-key”
operation, the LMS-350A is also one of the easiest-to-use sonars that
Lowrance has ever built. The wide “ClearVision” screen shows the
underwater world with high resolution and detail. The display and keyboard
are also lighted for night operation. The LMS-350A also has digital depth,
boat speed, surface water temperature, and distance travelled (log)
displays (requires an optional ST-T speed/temperature sensor).
If you purchase and install a LGC-1 GPS module, the LMS-350A can show
position and navigation information. Utilizing Rockwell's NavCoreV
technology, this GPS receiver is second to none in it's class.
MOUNTING - Bracket Mount
The LMS-350A can be mounted on it's gimbal bracket or in-dash mounted.
Brackets are supplied for both configurations, however if the dash is
thicker than 1/2", a special bracket will have to be purchased to mount the
unit in the dash. You can install the LMS-350A on its bracket in any
convenient location, provided there is clearance behind the unit when it is
tilted for the best viewing angle. Holes in the bracket base allow wood
screw or through-bolt mounting. You may need to place a piece of plywood
on the back of thin fiberglass panels to secure the mounting hardware.
Make certain there is enough room behind the unit to attach the power and
transducer cables.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-350A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-350A in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info