599316

Lowrance LMS-160 - GlobalMap 1600 Manual

76
Zoom out
Zoom in
Previous page
1/92
Next page
70
highlight the “SET KEEL OFFSET” label on the
“System Setup” menu, then press the right arrow
key. The screen shown at right appears. The cur-
rent bottom depth shows in the upper left corner
of the screen. The keel offset shows beneath it.
In this example, we need to change the keel off-
set so that the unit will add one foot to the depth,
since the transducer is one foot below the sur-
face. Press the right arrow key, then the up or
down arrow keys until +1.0 appears in the box, as shown at right, then
press the ENT key. This immediately changes the digital depth display at
the top of the screen by one foot. Press the EXIT key to erase this menu.
Note: Another way to use the keel offset feature is if you want to know the
depth of the water below the lowest part of the boat, instead of the sur-
face. To do this, measure the lowest part of the boat below the transducer.
In this example, we’ll use 3 feet. Now, using the keel offset feature, adjust
the offset for a
negative
3 feet.
Please note that adjusting the keel offset only affects the digital depth
display and all features that use the digital depth, such as the depth alarms
and FishTrack. This doesn’t affect the chart at all.
Calibrate Speed
You can calibrate the speed display if an optional
speed sensor is attached. To do this, highlight
the “Calibrate Speed” label on the “System Setup”
menu, then press the right arrow key. A screen
similar to the one at right appears.
If the digital speed display is slower than your
actual speed, add a positive percentage to make
it read faster. If the digital speed display is faster,
use a negative percentage to make it read slower. Use the arrow keys to
change the speed, then press the ENT key. Press the EXIT key to erase
this menu.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info