599316

Lowrance LMS-160 - GlobalMap 1600 Manual

75
Zoom out
Zoom in
Previous page
1/92
Next page
69
by highlighting the “Shallow Alm” label and pressing the right arrow key.
With the shallow alarm set at ten feet, anytime the digital display goes
below ten feet, the shallow alarm sounds.
Set the deep alarm in the same manner. If the bottom depth reading goes
below the deep alarm setting, the deep alarm will sound.
ZONE ALARM
The zone alarm is triggered when any echo
passes inside the zone alarm bar, shown on the
right side of the screen. To turn the zone alarm
on, highlight the “Zone Alarm” label on the sonar
alarm menu, then press the right arrow key. To
adjust the zone alarm, highlight the “Adjust Zone”
label, then press the right arrow key. A screen
similar to the one at right appears.
To adjust the top of the zone bar higher or lower, press the up or down
arrow keys while the “START” label is highlighted as shown on the screen
at right. To adjust the bottom of the zone bar, first press the right arrow key
to select “END” on the screen, then use the up or down arrow keys.
When the zone alarm is set, press the EXIT key to erase the menus.
FISH ALARM
Use the fish alarm for a distinctive audible alarm when fish or other sus-
pended objects are detected by the Fish I.D. feature. A different tone sounds
for each fish symbol size shown on the display. To turn the fish alarm on,
select “FISH ALARM” from the sonar alarm menu and press the right
arrow key. The unit will revert to the sonar display with the fish alarm
turned on. Repeat the above steps to turn the fish alarm off.
Note: If the unit is in the manual mode, turning the Fish Alarm on will also
turn the automatic mode and Fish ID on, also.
Keel Offset
Normally, this unit measures water depth from the face of the transducer.
Since the transducer is below the surface of the water, this distance is not
the exact water depth. If the transducer is one foot below the surface, and
the screen shows the water depth as 30 feet, then the depth is actually 31
feet.
You can calibrate the depth reading using the keel offset feature. First,
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info