599316
21
Zoom out
Zoom in
Previous page
1/92
Next page
15
Using the manual initialization method loads a position that’s close to
yours into the GPS receiver. It should now have position, time, and date,
thereby giving it the data it needs to determine which satellites are in
view. Once the satellites are known, the receiver searches for only those
satellites, making a lock faster than an auto search method.
All position and navigation data flashes until the unit acquires a position.
Do not rely on any data that is flashing! When the numbers are flashing,
they represent the last known values when the unit lost it’s lock on the
satellites.
Position Aquisition
When the receiver locks onto the satellites and calculates a position, it
shows the message “Position Acquired” on the screen. Once the unit has
acquired the satellites and the position acquired message appears, it’s
ready for use.
(Note: The altitude data may still flash even if the unit shows a “Position
Acquired” message and all other data is not flashing. The unit must be
locked onto at least four satellites to determine altitude. It only takes three
satellites to determine position. You can navigate with this unit if the alti-
tude is flashing, simply ignore the altitude display until it quits flashing.)
REMEMBER, DO NOT NAVIGATE WITH THIS UNIT UNTIL THE NUM-
BERS STOP FLASHING!
MODES
The LMS-160 has five modes: status, navigation, sonar, map, and win-
dow groups. The GlobalMap 1600 has four - no sonar mode. Use the
PAGES and arrow keys to switch between the different screens. The four
GPS screens that show by default are shown at the top of the next page.
(See the sonar section in this manual for information on sonar operation.)
To change modes, simply press the PAGES key.
A screen similar to the one at right appears. Use
the up or down arrow keys to change modes. (The
windows mode is shown as “groups”. Group “A”
is the first windows group.)
Press the right arrow key while the above menu
is showing to switch between different versions
of each mode. When the desired screen appears,
press the EXIT key to erase the menu.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info