599316

Lowrance LMS-160 - GlobalMap 1600 Manual

19
Zoom out
Zoom in
Previous page
1/92
Next page
13
To turn the unit on, simply press the PWR key. A
GPS logo screen appears, then the screen simi-
lar to the one at right appears. Read the mes-
sage on the screen, then press the EXIT key to
erase it or wait a few seconds and it automati-
cally clears. The screen shown below appears
next.
This screen appears each time you turn the unit
on. It shows a graphical view of the satellites that
are in view. Each satellite is shown on the circu-
lar chart relative to your position. The point in the
center of the chart is directly overhead. The small
inner ring represents 45° above the horizon and
the large ring represents the horizon. North is at
the top of the screen. You can use this to see
which satellites are obstructed by obstacles in
your immediate area if you hold the unit facing
north.
The GPS receiver is tracking satellites that are surrounded by a black
box. The receiver hasn't locked onto a satellite if it's number isn't sur-
rounded by a box, therefore it isn’t being used to solve the position.
Beneath the circular graph are the bar graphs, one for each satellite in
view. Since the unit has twelve channels, it can dedicate one channel per
visible satellite. Therefore, if only six satellites are visible, only six bar
charts show at the bottom of the screen. The wider the bar on the graph,
the better the unit is receiving the signals from the satellite.
The number in the upper left corner is the “expected horizontal position
error” or expected error from a benchmark location. In other words, if the
expected error shows 50 feet, then the position shown by the unit is esti-
mated to be within 50 feet of the actual location. However, this number is
only valid if you’re using DGPS or if S/A is turned off. Due to S/A, the
accuracy can only be less than 100 meters, 95% of the time, per U.S.
government specifications. Although the expected error is not accurate
unless you have a DGPS receiver, it does give you an indicator of the fix
quality the unit currently has. The smaller the expected error number, the
better (and more accurate) the fix is. If the expected error flashes, then
the unit hasn't locked onto the satellites, and the number shown isn't valid.
A light bulb indicator at the top right corner of the screen appears when
the backlights are on.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LMS-160 - GlobalMap 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LMS-160 - GlobalMap 1600 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info