599305
214
Zoom out
Zoom in
Previous page
1/232
Next page
204
EP-15 Fluid Level Calibration
The default calibration for the EP-15 Fluid Level is just as accurate as standard
fluid level gauges. If, however, the tank has an irregular shape or greater
accuracy is needed, calibration is recommended. There are three calibration
options: 2-Point, 3-Point and 5-Point.
2-Point Calibration
A 2-point calibration is best suited for rectangular or square-shaped tanks,
where the capacity of the top half of the tank matches the capacity in the
lower half of the tank. In a two-point calibration, you will set two points,
one each for empty and full levels. You can begin calibration at either of
the two points, but we recommend starting with an empty tank. You will
fill the tank to complete calibration.
1. Press
MENU| MENU, use to select NMEA 2000 and press ENT.
2. Highlight
BUS SETUP and press ENT, which will open the Bus Configuration
menu. A list of network devices will be at the top of the page.
3. Select the EP-15 Fluid Level and press
ENT.
4. Press to select
CALIBRATE and press ENT. The Device Calibration menu
will appear. Instructions on Calibration will be listed at the top of the menu.
5. Highlight
NUM PTS, press ENT and select 2. Press ENT.
6. Select FLUID LEVEL, press ENT, then select EMPTY LEVEL and press ENT.
7. Make sure the fuel tank is empty, highlight CALIBRATE and press ENT.
The following message will appear: Empty Level Calibration Completed.
Press ENT.
8. Fill up your tank, highlight FLUID LEVEL and press ENT.
9.
Select FULL LEVEL and press ENT. Highlight CALIBRATE and press ENT.
10.
The following message will appear: Full level Calibration Completed.
Press ENT, then press EXIT repeatedly to get back to the main display.
Calibrate is highlighted on the device configuration menu (left).
Calibration menu (right) with calibration instructions listed at the top.
214


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LCX-112C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LCX-112C in the language / languages: English as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info