623835

Lowrance HDS-12 Gen3 Manual

15
Zoom out
Zoom in
Previous page
1/66
Next page
| 13
Display Installation | HDS Gen3 Installation Manual
Display Installation
Mounting location
Choose the mounting locations carefully before you drill or cut. The
display should be mounted so that the operator can easily use the
controls and clearly see the display screen. Be sure to leave a direct
path for all of the cables. Lowrance displays are high-contrast, and
are viewable in direct sunlight, but for best results install the display
out of direct sunlight. The chosen location should have minimal
glare from windows or bright objects.
Ensure that any holes cut are in a safe position and will not weaken
the boat’s structure. If in doubt, consult a quali ed boat builder, or
marine electronics installer.
Before cutting a hole in a panel, make sure that there are no hidden
electrical wires or other parts behind the panel.
Do not mount any part where it can be used as a hand hold, where
it might be submerged, or where it will interfere with the operation,
launching or retrieving of the boat.
If bracket mounting the display, choose an area where the display
will not be subjected to excessive vibration.
The mounting location may a ect the internal GPS receiver. Test
the unit in it’s intended location to ensure satisfactory reception.
An external GPS source may be added to overcome poor reception
areas.
Leave su cient clearance to connect all relevant cables.
Good ventilation is required. Inadequate ventilation may cause the
display to overheat. Lowrance displays are designed to operate in
temperatures from -15° C to +55° C (+5° F to +131° F).
For overall width and height requirements, please see the
dimensions section on page 53.
!
Warning: When installing the displays, ensure appropriate
safety equipment is used, eg. ear mu s, protective glasses, gloves
and a dust mask.
Power tools may exceed safe noise levels, and can cast o
dangerous projectiles.
The dust from many materials commonly used in boat
construction may cause irritation or damage to eyes, skin, and
lungs.
3
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

lowrance-hds-12-gen3

Reset search

  • Hello I have downloaded version 18.2 and have found that this causing some issues on the HDS gen3, Does anyone know how to delete it and down load the old version again? Cheers Rusty Submitted on 24-7-2020 at 08:02

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance HDS-12 Gen3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance HDS-12 Gen3 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance HDS-12 Gen3

Lowrance HDS-12 Gen3 Quick start guide - English - 8 pages

Lowrance HDS-12 Gen3 User Manual - English - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info