757007
96
Zoom out
Zoom in
Previous page
1/110
Next page
98 User Manual
A.2.2 INSTALLATION OF SOFTWARE
A.2.2.1 Registrations of user ID
The user identification number is a string of 16 characters and numbers ####-
####-####-####. The character - is not a part of the code and is only used to make
the code more legible and is not to be inserted.
The code is supplied together with the subscription documents from C-MAP.
The registration code can only be used in one (1) chart plotter. The C-Forecast server
will associate the code and the chart plotter in which the code was first used. During
the connection start-up, the C-Forecast server will compare the registration informa-
tion and the code identifying the chart plotter and will only connect to a known
chart plotter.
Note
The Registration Code is contained in the chart plotter and can after insertion not be changed
by the user. However if the user whish to change the subscription, for the reason of change to an
other chart plotter (for example change to and other model or change because of faulty chart) it
is nessesary to contact C-MAP directly in order to transfer the subscription to the new char plotter.
A.2.2.2 Inserting the telephone number of the C-Forecast server
The telephone number through which the C-COM will make the connec-
tion with the C-Forecast server must be inserted in the menu part - C-Forecast set-up.
A.2.2.3 Activation of the serial port
Some chart plotters are build with more than one serial port, it is therefor
necessary to chose which port is to be used. The user can do this in the menu part - C-
Forecast set-up.
A.2.3 TRANSFER OF WEATHER DATA
Before the data transfer can start, it is necessary to insert: Time of departure
(ETD), current position (PO) manually or obtained from the GPS and the heading.
All the data transfer function are available in the menu - C-Forecast, Preview down-
load.
A.2.3.1 Insert current date and time
Normally the chart plotter will receive date and time through the build in or
attached GPS, or in simulation mode - manually. In case it is necessary to insert the
date and time manually, before collection of data from C-Forecast, it is done in the
menu - C-forecast, preview, date and time (ETD).
If the date and time are not inserted the server can not provide any informa-
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PLUS in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info