757007
95
Zoom out
Zoom in
Previous page
1/110
Next page
97
User Manual
A.2.1.2 Verification of C-COM module
The Modem Test (can also read; SYSTEM TEST *) makes it possible to test
the and verify a connection between the C-COM and the chart plotter.
Note (*)
To start the SYSTEM TEST switch on the chart plotter using PWR and any other key.
The Modem Test controls that there is a communication between the chart
plotter and the C-COM by for a short time transmitting a serie of diagnostic com-
mands to the C-COM and verify the result.
If the chart plotter is build with two serial ports, it is possible to chose which
port to use for connection with the C-COM module.
The diagnostic screen for Modem Test will show the following information:
a. MODEM OK: #
b. MODEM ERROR: #
c. MODEM TIMEOUT ERROR: #
a. If the number (#) by the MODEM OK shows 0, it's an indication that the connec-
tion between the chart plotter and the C-COM module is established and the C-
COM is responding correctly. No problems have been found.
b. If the number (#) by the MODEM OK is different to 0, it shows that the connec-
tion to the C-COM module has not been made - the C-COM module may be defect.
c. If the number (#) by the MODEM TIMEOUT ERROR is different to 0, it shows
that the C-COM module is responding but the link to the chart plotter has not been
made.
The error may be for one of the following reasons:
- The C-COM is not connected or not connected correctly to the chart plotter.
- The C-COM module has not got a power supply.
- The serial port to which the link between the C-COM and the chart plotter is
made, is not the correct port, to which the C-COM should be connected.
A.2.1.3 The GSM SIM-card
The GSM SIM-card must be of a type which will allow data transfer. The
SIM-card must be inserted into the SIM-slot in the C-COM module. If the GSM SIM-
card need a PIN-code inserted, for the SIM-card to be activated, then this can be done
in the C-Forecast operation menu. The chart plotter does not accept deactivation of
the PIN-code.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz STARLIGHT PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz STARLIGHT PLUS in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info