522471
83
Zoom out
Zoom in
Previous page
1/152
Next page
85
User Manual
condition if the navigation is activated on one of the two chart plotters, a warning message
will be shown to notify that the C-Link Navigation Data will be ignored by the other chart
plotter.
4.8.1.4 Slave Chart Plotter
Operating mode
To select the Slave mode (Secondary Station) follow the procedure:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"C-LINK" + 'ENTER' + "Secondary Station" + 'ENTER'
When Slave mode is set, the chart plotter cannot manipulate the C-Link Navigation Data
anymore.
Stop current navigation
If the navigation was already active, it will be disabled as soon as Slave mode is set. An
appropriate warning message will be shown to notify that the navigation is already active
and to confirm whether Slave mode can be set.
Inhibit navigation operation
As soon as Slave mode is set, the destination cannot be placed anymore either the C-Link
Navigation Data is received from the Master or not. Also, when the C-Link Navigation
Data is received from the Master, it will not be allowed to deactivate the navigation.
Inhibit Route following
While navigating to the Route received from the Master the destination is reached (either
applying distance or perpendicular criteria), the destination will not be moved to the next
Waypoint on the Route.
MOB handling
If the navigation to the external destination is active and 'MOB' is pressed on the Slave chart
plotter, the MOB is placed but the navigation to the MOB is not activated.
Notes
While navigating to the external destination the operating mode is switched to Master mode,
the navigation to the external destination will be terminated. An appropriate warning message
will be shown to notify that the navigation to the external destination is active and to confirm
whether Slave mode can be set. Setting Slave mode, the C-Link Navigation Data will be
deleted.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz COMPACT X7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz COMPACT X7 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info