3. Enter the 4-digit system PIN.
4. Press OK to confirm
5. Press OK to re-confirm.
4.5 Register a Handset
Your handset is pre-registered to the base station. Up to five handsets can be registered to a
single base station.
If for some reasons, the handset is not registered to the base station, “REGISTER ” will be
displayed on the handset screen, register your handset following the process below.
1. Press and hold the PAGE key (in the bottom of the base station) for about five seconds,
the base station is entered into registration mode.
2. Press OK then Down key of the handset until to select REGISTRATION .
3. Press OK and you are requested to enter the 4-digit system PIN (The default system PIN
code is 0000).
4. Enter the 4-digit system PIN and press OK to confirm.
NOTE : If the handset registration is successful, the handset will automatically be allocated
the next available handset number. This handset number is shown in the handset display in
standby mode.
4.6 Deregister a Handset
You may need to deregister your handsets if you wish to change the designated handset
number of your registered handsets.
You are requested to enter the 4-digit PIN in order to de-register a handset from the base
station.
Note : You cannot deregister the handset that you are currently using.
1. Press OK then Down key until to select BS SETTINGS.
2. Press OK then Down key until to select DELETE HS.
3. Press OK.
4. Enter the 4-digit system PIN.
5. Press OK. A list of registered handsets is displayed.
6. Press Down key to select one of the handsets that you want to de-register.
7. Press OK to confirm.
