679338
10
Zoom out
Zoom in
Previous page
1/18
Next page
10
Subwoofer 300
Operating instructions
english
Settings directly on the Subwoofer 300
Before commencing the start-up and settings, please make sure that all cables
are connected correctly.
Status LED
Meaning of the colours of the status LED:
Blue: DIGITAL AUDIO LINK – input active
Green: LINE IN – input active (analogue signal)
Red: Disorder
Status appears for 10 sec., then the LED will turn off. If one of the control buttons
is pressed, the status LED switches on as well.
Settings via control buttons
Using several control buttons you can make various settings on the subwoofer.
The corresponding LEDs indicate the status. The LED display switches off after
10 sec.; when pressing one of the control buttons, the LEDs turn on again.
The handling of the settings directly on the subwoofer will depend on the con-
nection types of the subwoofer. Depending on whether the subwoofer is con-
nected via DIGITAL AUDIO LINK or LINE IN to the TV or an audio source.
When connecting the subwoofer via DIGITAL AUDIO LINK to a TV (SL3xx chas-
sis and more advanced) the settings PHASE and SUBWOOFER GAIN can
optionally be made on the television or directly on the subwoofer 300 A local
change on the subwoofer 300 will result in a feedback to the TV set.
When connecting the subwoofer to a TV or any audio source via LINE IN, these
settings must be made directly on the Subwoofer 300.
All set values remain unchanged after the subwoofer has been switched on and
off.
MODE settings
With the MODE button you can set the on/off behaviour of the subwoofer. The
two LED indicators AUTO ON/OFF and ON show the selected mode.
The setting for MODE will only be made locally on the subwoofer.
Selecting AUTO ON/OFF:
By selecting AUTO ON/OFF, the subwoofer automatically switches on from
standby, when a connected TV set is switched on at the DIGITAL AUDIO LINK
connector or when an audio signal is applied at the cinch jacks LINE IN (RIGHT
/ LEFT / SUB/LFE) .
If both connectors are simultaneously used (switched on TV set at DIGITAL
AUDIO LINK, audio source signal at LINE IN) DIGITAL AUDIO LINK has priority.
If you switch the TV set at DIGITAL AUDIO LINK to standby mode, the subwoofer
automatically switches to LINE IN.
If the TV set connected to the subwoofer at DIGITAL AUDIO LINK is switched
to standby, or an audio signal is not applied at LINE IN, the subwoofer in AUTO
ON/OFF mode will automatically switch off after 10 min (standby mode).
When connected to LINE IN, the subwoofer may be automatically turned on,
if we have interference signals on the audio lines (LINE IN).
When connected to LINE IN, the subwoofer can switch off automatically
during longer, very quiet periods. In this case, increase the volume.
Selecting ON:
When being in mode ON, the subwoofer will automatically switch off after
4 hours (standby mode), on the condition that the TV set connected to the
subwoofer at DIGITAL AUDIO LINK is switched to standby or an audio signal is
not applied at LINE IN.
PHASE settings
With the PHASE button you can set the phasing of the subwoofer. The two LED
indicators and 180º indicate the selected setting.
Test both values ( and 180º) and select the one with which you perceive a
clearer bass reproduction at your listening position.
When connecting the subwoofer via DIGITAL AUDIO LINK, the phase is set
in the sound components wizard (Setting of the phasing, see page 13) on
the TV set.
If after configuring the subwoofer via the sound components wizard the
PHASE setting is changed locally with the button on the first subwoofer, an
on-screen display appears with the modified values.
Settings directly on the Subwoofer
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Subwoofer 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Subwoofer 300 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Subwoofer 300

Loewe Subwoofer 300 User Manual - German - 18 pages

Loewe Subwoofer 300 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info