679338
11
Zoom out
Zoom in
Previous page
1/18
Next page
Subwoofer 300
Operating instructions
11
english
Adjusting the SUBWOOFER GAIN
Using the SUBWOOFER GAIN +/-
buttons you can adjust the basic bass
volume. The three LED indicators -6 dB / 0 dB / +6dB indicate the adjusted
volume.
The adjustment range of -6 dB to +6 dB can be changed in steps of 1 dB. The
corresponding LED will light up for the values -6 dB, 0dB and +6dB. For inter-
mediate values, the LEDs will be dimmed accordingly.
When connecting the subwoofer via DIGITAL AUDIO LINK, the subwoofer
volume is set in the sound components wizard (Adjusting the speaker volume,
see page 13) on the TV set.
If after configuring the subwoofer via the sound components wizard the
SUBWOOFER GAIN setting is changed locally with the buttons on the first
subwoofer, an on-screen display appears with the modified values.
Setting the BASS EQ
When using the BASS EQ
button, you can set the lowest frequency ranges (20
Hz - 50 Hz) for bass reproduction to be raised or lowered. The three LED indica-
tors REDUCE / NORMAL / BOOST indicate the selected setting.
The setting for BASS EQ will only be made locally on the subwoofer.
Selecting REDUCE:
When the subwoofer is near the corner of the room, select the setting REDUCE
(-3 dB).
Selecting NORMAL:
When the subwoofer is near a wall, select the setting NORMAL (0 dB).
Selecting BOOST:
When the subwoofer is in free space, select the setting BOOST (+3 dB).
Settings directly on the Subwoofer
Setting the CONNECTED SPEAKERS
With the CONNECTED SPEAKERS
button you select the speaker type that is
connected to the subwoofer. The three LED indicators SMALL / MEDIUM /
LARGE indicate the selected setting.
Depending on the setting, the crossover frequency for the bass response
changes (small = 160 Hz, medium = 110 Hz, large = 80 Hz).
The setting for CONNECTED SPEAKERS will only be made locally on the
subwoofer.
For certain Loewe speaker types, a compensation curve is stored to achieve
optimum audio playback.
Speaker types:
Small: Loewe Satellite Speaker (Art. no. 66201xxx)
Medium: Loewe Speaker (Art. no. 56223xxx)
Large: Loewe Stand Speaker (Art. no. 66202xxx)
A long press (about 4 sec.) on the CONNECTED SPEAKERS button turns off
the stored compensation curve. This provides the possibility to use other types
of speakers. The flashing LED indicates that the compensation curve has been
disabled. The crossover frequency can be changed as described above.
To enable the compensation curve again, press button again and hold.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Subwoofer 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Subwoofer 300 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Subwoofer 300

Loewe Subwoofer 300 User Manual - German - 18 pages

Loewe Subwoofer 300 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info