Manual Load Up 77007 (page 23 of 40) (English, German, Dutch, French)

621659

Zoom out

Zoom in

1/40

Load UP

and are provided with an automatic amperometric resetting protection

(secondary) and fuse (primary) inside the machine.

♦ Model Load 77007 has amperometric protection for the rectifier and a

protective device for the transformer. The starter has a fuse.

8.0 TROUBLE SHOOTING

If, once all the connections have been completed following the above instructions,

the thermal protection is tripped and the ampmeter reaches the bottom of the

scale, the causes can be traced to:

• reversal of polarity in connecting the pliers to the battery:

eliminate the problem

by resetting the thermal protection by pushing the proper push-button for the

manual one or wait a few minutes for the automatic one.

• casual or indirect contact between the charging pliers:

eliminate the contact,

reset the thermal protection manually or wait a few minutes for the automatic

one.

• battery completely discharged and at a higher capacity than the power of the

battery charger: if the absorption of the battery is excessive, it is advisable to

have the battery re-charged by a motor vehicle electrician and later maintain it

at a high charging level with the frequent use of the battery charger or to get a

more powerful battery charger.

• battery with inner elements in short circuit:

it is necessary to replace the

battery.

For other types of inconveniences call your local dealer or a qualified technical

engineer.

9.0 FIRST START UP MODELS WITHOUT STARTER

(77001-77002-77004-77006)

After following all the above instructions proceed as follows:

1. Check that the mains voltage corresponds to the nominal one of the battery

charger indicated on the plate.

2. Disconnect the cables connected to the positive pole (+) of the battery.

3. Untie the caps of the battery and check the level of the electrolytic liquid.

4. Connect in sequence:

- the red clamp to the positive pole (+)

- the black clamp to the frame of the car, away from the battery and from the

fuel pipe.

5. Find out the voltage of the battery to be charged (12 or 24 V) and position the

proper commutator of the battery charger on the same value.

6. Start the battery charger, check the position which the indicator of the

ampmeter will acquire.

7. Adjust the charging current with the proper commutator (MIN-BOOST).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Load Up 77007 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Load Up 77007 Manual

Product: