742178
9
Zoom out
Zoom in
Previous page
1/20
Next page
Operating instructions
This appliance can be operated by both remote control and manual button. Once the unit has been
properly connected to an earthed electrical outlet, turn on the main switch located in front of the
appliance. A beep should be heard when the power is first applied.
Operating by Manual Button
- Manual on/off switch: The power switch supplies power to all of the functions of the fireplace.
- This switch must be in the ‘on’ position for any of the functions including the remote to work.
- Flame button: By pressing the flame effect button the unit will cycle through three flames.
- Heater button: Press once Heater button left hand heater on. Press again turns left hand heater off and right hand
heater on.
- Press third time turns left and right hand heater off. There are 3 levels you can cycle through
- including the off setting.
- Thermostat setting: 1-9 Step, room temperature is around 9-34 °C, room temperature is too high, please turn the
thermostat knob counter-clockwise direction. If you need to turn on the heater, you can turn the thermostat knob
clockwise direction.
- Note: It is possible that if the room temperature is higher than the thermostat setting it will
- not come into operation and the heater will remain off until the temperature of the room
- cools.
Operating by Remote Handset
- Make sure the battery is installed properly in the remote control.
- The effective range of the remote control is up to 4 meters or 13 feet.
- Power On/Off button: The Power button will put the fireplace in a standby mode. This will turn off
all functions at once but will hold the settings in memory.
- Except Heater function, by pressing the button again the unit will turn on at the same settings.
- Flame effect button: The fire has three flame effects, by pressing the flame effect button the
- unit will cycle through each effect.
- High button: Press once turns Fan on, 8s later High heat on. Press again turns heat off. 8s later fan
off.
- Low button: Press once turns Fan on, and 8s later Low heat on. Press again turns heat off. 8s later
Fan off.
To Reset the Heater
The appliance is fitted with an protection system. The heater includes a protection system that shuts off the heater if it
overheats for any reason:
- Turn unit to off.
- Unplug unit wait 5 minutes.
- Plug in and turn on.
- Remote control functions
In order to protect the product not becoming too hot, there is 8s delay when turning on the heater,
also there is 8s delay when turning off the heater fan.
Main power switch
Heater button
Flame button
Thermostat knob
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Livin Flame Frankfurt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Livin Flame Frankfurt in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info