744839
13
Zoom out
Zoom in
Previous page
1/45
Next page
13 GB/IE
If the connection was successful, the LED
4
will light up for approx. 2 seconds. The LED
light panel
1
flashes three times.
Disconnecting the remote
control from the LED light panel
(without Gateway / App)
Switch the light on.
Hold the remote control
12
close to the LED
light panel
1
(max. 80 cm distance).
Hold the button
3
down for 3 seconds. The
LED
4
should now start flashing.
If the disconnection was successful, the LED
4
will light up for approx. 2 seconds. The LED light
panel
1
flashes three times.
Replacing the battery
12 9
10
Remove the battery cover
10
.
Remove the drained battery. Insert a new bat-
tery into the battery compartment
9
. The plus
symbol (+) on the battery must be facing out-
wards.
Close the battery compartment cover
10
.
Wall mounting (optional)
1
1
2
2
5
6
7
8
DANGER OF ELECTRIC
SHOCK!
Be careful not to damage any cables or pipes
when drilling. Use a voltage / metal detector.
Mark the 2 drill holes using the holes
8
in the
wall bracket
6
intended for the screws.
Drill the holes.
Insert the wall plugs
14
into the holes.
Mount the wall bracket
6
using the screws
7
.
If you want to attach the wall bracket
6
to a
smooth surface, stick the enclosed self-adhesive
pads
5
to the intended points on the wall
bracket
6
.
Remove the protective film from the self-adhe-
sive pads
5
.
Attach the wall bracket
6
in the chosen loca-
tion.
Cleaning the remote control
Do not use solvents, petrol, etc. These would
damage the remote control.
Before cleaning, remove the battery from the
battery compartment
9
.
Clean the remote control with a damp cloth.
Replace the battery in the battery compartment
after cleaning
9
.
... / Replacing the battery / Wall mounting... / Cleaning the remote control... / App functions / Remote control functions / Connecting the remote ...
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LivarnoLux IAN 334437 Zigbee Remote Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LivarnoLux IAN 334437 Zigbee Remote Control in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info