744839

LivarnoLux IAN 334437 Zigbee Remote Control Manual

12
Zoom out
Zoom in
Previous page
1/45
Next page
12 GB/IE
... / Replacing the battery / Wall mounting... / Cleaning the remote control
14. Choose a room in order to specify the position
of the light. The chosen room will be shown in
grey.
15. Click “Done“ to confirm.
16. The learning process is complete.
17. Click
<
to return to the home screen.
Disconnecting the remote
control and smart phone
1. Open the “Lidl Home“ app.
2. Go to the
“Home“ tab.
3. Choose one of the categories:
– ZigBee Gateway
– LED light panel
– Remote control
4. Go to
.
5. Go to “Remove device“.
6. Click “Confirm“ to proceed.
App functions
Note: Make sure that you are always operating
the current version of the app on your smartphone.
Update the app if necessary.
The following modes are
available via app control
Switching on and off
– Remaining time: Set up a timer
–
: Switch on and off
– Programme: Create schedules for when
the lights should be switched
on and off automatically
White
– Touch arc: Adjust light colour from
3,000 K to 6,000 K
– Touch panel: Adjust light intensity from
1 % to 100 %
Scene
– Night: warm, soft light
– Reading: neutral light
– Working: cold white light
– Leisure: bright, warm light
– Adding a scene: to save custom-designed
lighting setups
Remote control functions
Switch on
2
Select the colour temperature
2
:
– Warm white
– Medium warm white
– Medium cold white
– Cold white
Switch off
3
Reduce brightness
11
Increase brightness
13
Connecting the remote control
with the LED light panel
(without Gateway / App)
Note:
If you have previously connected the LED light
panel
1
with the Gateway, you must reset the
LED light panel
1
(see “Resetting the light“).
You can control up to 30 LED ceiling lights in
sync with one remote control.
Only one remote control can be connected
per light.
Each light must be connected individually.
Repeat the process for each individual light.
Remove the protective film from the battery
compartment
9
.
Switch the LED light panel
1
on. The LED light
panel
1
will flash slowly.
Wait 3 minutes until the LED light panel
1
stops flashing.
Hold the remote control
12
close to the LED
light panel
1
(max. 80 cm distance).
Hold the button
2
down for 3 seconds. The
LED
4
should now start flashing.
... / App functions / Remote control functions / Connecting the remote ...
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LivarnoLux IAN 334437 Zigbee Remote Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LivarnoLux IAN 334437 Zigbee Remote Control in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info