300403

Linksys wip330 tel wifi voip Manual

49
Zoom out
Zoom in
Previous page
1/99
Next page
Wireless-G IP Phone
41
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Authentication Mode. You have a choice of Auto Switch, Share Key, Open System, and WPA-
PSK. To change the Authentication Mode, select Edit. A new window will open. Scroll through
the modes, and select the appropriate mode. Select Save to save the new Authentication Mode,
or select Exit to return to the Edit Profile menu without changing the Authentication Mode.
Proceed to the section for the Authentication Mode you have selected.
Auto Switch, Share Key, or Open System
Encryption. You have a choice of Disabled and WEP encryption. To change the Encryption
method, select Edit. If you select Disabled, there are no other settings to change. If you select
WEP, there are two more settings available, Key Index and WEP Key.
Key Index. For the index of transmit keys, you have a choice of 1-4. To specify which WEP key
the IP Phone will use, select Edit. A new window will open. Scroll through the numbers, and
select the appropriate transmit key number. Select Save to save the new transmit key number,
or select Exit to return to the Edit Profile menu without changing the number.
WEP Key. To enter the WEP Key, select Edit. Enter the new WEP Key in the new window. Press
the center selection key to save the new WEP Key, or select Exit to return to the Edit Profile
menu without changing the key.
802.1x. You have a choice of Enable and Disable. The Enable option configures the IP Phone for
a network using 802.1x authentication. To change the 802.1x setting, select Edit.
If 802.1x is enabled, configure the EAP Type setting. Select Edit. You have a choice of TLS, MD5,
and PEAP. Select Save to save the new EAP Type, or select Exit to return to the Edit Profile
menu without changing the EAP Type.
Figure 4-36: Edit WEP
Key
Figure 4-35: Change
Authentication Mode
Figure 4-37: Enter WEP
Key
Figure 4-38: Change
EAP Type (802.1x)
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wip330 tel wifi voip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wip330 tel wifi voip in the language / languages: English as an attachment in your email.

The manual is 11,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info