300403
48
Zoom out
Zoom in
Previous page
1/99
Next page
Wireless-G IP Phone
40
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Profiles
You will see a list of profiles (when you have profiles already configured). Select Option to see menu
choices. Select Exit to return to the previous menu.
You can designate the order of the profiles saved by the IP Phone. The next time it is powered on, it
will use the first profile to automatically connect to the profile’s wireless network. If that network is
not available, the IP Phone will try the next profile. This will continue until it has connected to a
wireless network.
Option
You have these choices: Edit (available when you have at least one existing profile), Add, Delete
(available when you have at least one existing profile), Connect, Go Down/Up (available when you
have more than one profile), and Save <network name> (available when the IP Phone is connected
to a network lacking a profile). The Edit and Add options configure the same settings. The Edit
option is used for changing existing profiles, while the Add option is used for creating new profiles.
Select Return to return to the previous menu.
Edit. Select Edit to edit a profile’s information: SSID (wireless network name), Wireless Mode,
Authentication Mode, and Encryption. (Additional setting may be available depending on the
encryption used.) Scroll through these choices, and select Edit to change a setting.
SSID. To change the SSID, select Edit. Enter the new SSID in the new window. Press the center
selection key to save the new information, or select Exit to return to the previous menu.
Wireless Mode. You have a choice of Infrastructure and Ad hoc modes. To change the Wireless
Mode, select Edit.
infrastructure: a wireless
network that is bridged to
a wired network via an
access point.
ad-hoc: a group of
wireless devices
communicating directly to
each other (peer-to-peer)
without the use of an
access point.
ssid (service set
identifier): your wireless
network’s name.
Figure 4-32: Wi-Fi
Profiles
Figure 4-33: Edit SSID
Figure 4-34: Edit
Wireless Mode
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys wip330 tel wifi voip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys wip330 tel wifi voip in the language / languages: English as an attachment in your email.

The manual is 11,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info