727826
18
Zoom out
Zoom in
Previous page
1/77
Next page
14
Setup
Linksys
Subnet:
If the DMZ and WAN are located in different subnets:
If the ISP issued 16 real IP addresses: 220.243.230.1-16 with Mask
255.255.255.240, users have to separate the 16 IP addresses into two groups:
220.243.230.1-8 with Mask 255.255.255.248, and 220.243.230.9-16 with Mask
255.255.255.248 and then set the device and the gateway in the same group
with the other group in the DMZ.
Range:
If the DMZ and WAN are within same subnet:
IP Range: Input the IP range located at the DMZ port.
Setting Password
Use the Configuration > Setup > Password page to change the administrator
username and password. It is strongly recommended to change the default
username and password (admin/admin).
CAUTION If the password is forgotten, reset the router to factory default
settings. All the configurations of the router will disappear.
NOTE Remember to click Save to save your settings before leaving the page.
You can also click Cancel to leave without any change.
NOTE If you want to enable remote access on the Firewall > General setting,
changing your password is necessary.
Old Password: Enter the old password. The default
password is admin.
New Username: Enter a new username. To keep the
existing username, leave this field blank.
Confirm New Username: Re-enter the new username.
New Password: Enter a new password for the router.
Alphanumeric characters and symbols
are allowed, but no spaces.
Confirm New Password: Re-enter the new password.
Minimum
Password Complexity:
Check the box to enable box if you want
to enforce password complexity and
enable the Password Strength Meter.
This option is enabled by default and is
recommended.
NOTE When Minimum Password Complexity is enabled, the password must
meet the requirements listed below.
• At least 8 characters is must.
• The password cannot be the same as Username.
• The password cannot be the same as the current password
• Must contain characters from at least 3 of the following 4 categories:
uppercase letters, lowercase letters, numbers, and special characters
available on a standard keyboard.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info