727826
17
Zoom out
Zoom in
Previous page
1/77
Next page
13
Setup
Linksys
L2TP
Specify WAN IP
Address
Configure a static IP address. The IP address could be one
issued by an L2TP server.
Subnet Mask Input the subnet mask of the static IP address.
Default Gateway Input the IP address of the L2TP server.
Username Input the username of the L2TP client.
Password Input the password of the L2TP client.
Connect on
Demand
Enables auto-dialing for a dial connection. When the
client port tries to connect to the Internet, the device will
automatically connect with the L2TPserver. When the
network has been idle for a period of time, the system
will break the connection automatically. (The default
time for automatic connection break is five minutes).
Keep Alive Enables the dial connection to redial automatically
when disconnected. Set the redialing time (default is 30
seconds).
MTU Choose Auto or Manual. Default setting is Auto. The
default manual setting value is 1500 bytes. A different
value could be set in a different network environment
(e.g., ADSL PPPoE MTU: 1492).
Transparent Bridge:
The feature will come in handy in when a company wants to add a firewall or
dual-WAN device without changing the IP addresses of the computers in its
intranet. This function will enable users to integrate existing networks without
changing the original structure. Select the Transparent Bridge mode for the
WAN connection mode. In this way, users will be able to connect normally to
the Internet while keeping the original IP addresses in the intranet.
If there are two WANs configured, users still can select Transparent Bridge
mode for WAN connection mode, and load balancing will still function as usual.
Specify WAN IP Address: Input one of the static IP addresses issued by
ISP.
Subnet Mask: Input the subnet mask of the static IP address
issued by your ISP, such as: Issued eight static
IP addresses: 255.255.255.248. Issued 16 static
IP addresses: 255.255.255.240.
Default Gateway: Input the default gateway of the static IP
address issued by your ISP. For ADSL users, it
is usually an ATU-R IP address.
DNS Server: Input the DNS IP address set by your ISP.
At least one IP group should be input. The
maximum acceptable is two IP groups.
Internal LAN IP Range: Input the available IP range issued by your
ISP. If your ISP issued two discontinuous IP
address ranges, users can input them into
Internal LAN IP Range 1 and Internal LAN IP
Range 2, respectively.
MTU (Maximum Transmission
Unit):
MTU is abbreviation of Maximum Transmission
Unit. Auto and “Manual” can be chosen. The
default value is 1500. Different value could
be set in different network environment. (e.g.
ADSL PPPoE MTU: 1492)
The default is Auto.
DMZ Setting
For some network environments, an independent configurable DMZ port
may be required to set up externally connected servers such as WEB and Mail
servers. Therefore, the device supports a set of independent configurable DMZ
ports for users to set up connections for servers with real IP addresses. The DMZ
ports act as bridges between the Internet and LANs.
Check Enable DMZ box and click the edit icon to configure DMZ port.
The DMZ configuration can be classified by subnet and range:
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info