602210
8
Zoom out
Zoom in
Previous page
1/24
Next page
4
Appendix A
Troubleshooting
4
Cable Modem with USB and Ethernet Connections
4
The Online LED never stops ashing.
Go through this checklist until your problem is solved:
Make sure the Cable Modems MAC address has been registered with
your cable ISP. In order for the Cable Modem to work, you must call
and have the ISP activate the Cable Modem by registering its MAC
address. You can find the modem MAC address on a label located on
the Cable Modems bottom panel.
Make sure the coaxial cable is firmly attached between the Cable
Modem and the wall jack.
The signal from your cable company’s equipment may be too weak
or the cable line may not be properly attached to the Cable Modem.
If the cable line is properly connected to the Cable Modem, then
call your cable company to verify whether a weak signal may be the
problem.
All of the LEDs on the Cable Modem indicate that the Cable Modem is
functioning properly, but you still cannot access the Internet.
Go through this checklist until your problem is solved:
If the Power, DS, US, and Online LEDs are lit but not flashing, then
the Cable Modem is operating properly. Power your computer off
and back on again. This will cause your computer to re-establish
communications with your cable ISP.
Press the Reset button on the back panel of the Cable Modem. Using
an object with a small tip, such as a pen, push the button until you
feel it click. When the Online LED is solidly lit, try to connect to the
Internet again.
Make sure TCP/IP is the default protocol used by your computer. For
more information, refer to Windows Help.
The power on the Cable Modem goes on and o sporadically.
You may be using the wrong power adapter. Make sure the power
adapter you are using is the one included with the Cable Modem.
WEB: If your questions are not addressed here, refer to the
Linksys website, www.linksys.com
1.
2.
3.
1.
2.
3.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys CM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys CM100 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info