602210
7
Zoom out
Zoom in
Previous page
1/24
Next page
3
Appendix A
Troubleshooting
3
Cable Modem with USB and Ethernet Connections
Appendix A: Troubleshooting
You cannot access e-mail or the Internet.
Go through this checklist until your problem is solved:
Make sure all of your connections are secure.
The Ethernet cable should be inserted completely into both the
computer’s network adapter and the Ethernet port on the back
panel of the Cable Modem.
If you are using the Cable Modems USB port, check the USB
connections to the Cable Modem and your computer.
Check all cables between your computer and the Cable Modem
for frays, breaks, or exposed wiring.
Make sure your power adapter is properly plugged into both the
Cable Modem and the electrical outlet or surge protector.
If the Cable Modem is properly connected, the Power, DS, US, and
Online LEDs on the Cable Modem should be solidly lit. The Link
LED should be solidly lit or flashing.
Press the Reset button on the back panel of the Cable Modem. Using
an object with a small tip, such as a pen, push the button until you
feel it click. When the Online LED is solidly lit, try to connect to the
Internet again.
Call your cable ISP to verify that their service is two-way. This Cable
Modem is designed for use with two-way cable networks.
If you installed the Cable Modem using the Ethernet port, make sure
the computers network adapter is operating correctly. Make sure the
adapter is listed in the Windows Device Manager and has no conflicts.
For more information, refer to Windows Help.
Make sure TCP/IP is the default protocol used by your computer. For
more information, refer to Windows Help.
If you are using a cable line splitter so you can connect the Cable
Modem and a television at the same time, remove the splitter and
reconnect your cables so that the Cable Modem is connected directly
to the cable wall jack. When the Online LED is solidly lit, try to connect
to the Internet again.
1.
a.
b.
c.
d.
e.
2.
3.
4.
5.
6.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys CM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys CM100 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info