602207

Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router Manual

32
Zoom out
Zoom in
Previous page
1/47
Next page
3. The next screen shows all of the Wireless AP + Cable/DSL Router’s avail-
able ports. The port you will want to configure is the printer port, shown in
this screen as “SC0D8B45_P1 Shared Port”. (Your port number may be dif-
ferent.)Make sure this port is selected and click the Next button to continue.
4. At this stage, Windows 2000 will notify you that a driver has already been
installed for this printer. This is due to an idiosyncrasy in Windows 2000.
Though you have not already installed printer drivers, you will want to select
Keep Existing Driver (recommended). DO NOT choose Replace existing
driver. Click the Next button to continue.
58
When adding a printer under Windows 2000, make sure that the final window
in the Installing the PrintServer’s Drivers section does NOT have the “Run
Print Port Setup now” box checked. Selecting this box will lead to an error in
the installation process. Make sure that this box is NOT selected before con-
tinuing to this section.
1. Go to “Add Printer” by clicking the Start button, selecting Settings, and
clicking Printers.
Then, to begin the configuration process, click the Next button.
2. The next screen will ask how your printer is attached to your computer.
Since your printer is being connected to a network, rather than a single
computer, you will still want to select Local Printer. Do not select
Network Printer, even though your printer is being connected to a
Network, since it is being connected directly to the Wireless AP +
Cable/DSL Router. Nor should you select Automatically Detect and Install;
this is only done when the printer is connected to the PC. Make sure Local
Printer is selected, as in the screen below, and click the Next button to con-
tinue.
57
Etherfast
®
Wireless AP + Cable/DSL Router with PrintServerInstant Broadband
TM
Series
Adding a Printer under Windows 2000
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info