Manual Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router (page 46 of 47) (English)

602207

Zoom out

Zoom in

1/47

Instant Broadband™ Series

EtherFast

Wireless

AP + Cable/DSL Router

with PrintServer

User Guide

Use this guide to install: BEFW11P1

trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trade-

marks of Microsoft Corporation. All other trademarks and brand names are the proper-

ty of their respective proprietors.

LIMITED WARRANTY

Linksys guarantees that every Instant Broadband EtherFast Wireless AP + Cable/DSL

Router with PrintServer is free from physical defects in material and workmanship under

normal use for one year from the date of purchase. If the product proves defective dur-

ing this warranty period, call Linksys Customer Support in order to obtain a Return

Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BAR-

CODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN

REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When return-

ing a product, mark the Return Authorization Number clearly on the outside of the pack-

age and include your original proof of purchase. All customers located outside of the

United States of America and Canada shall be held responsible for shipping and han-

dling charges.

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PROD-

UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-

AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-

WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY

PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-

ry, with respect to its products or the contents or use of this documentation and all

accompanying software, and specifically disclaims its quality, performance, mer-

chantability, or fitness for any particular purpose. Linksys reserves the right to revise or

update its products, software, or documentation without obligation to notify any individ-

ual or entity. Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

FCC STATEMENT

This Instant Broadband EtherFast Wireless AP + Cable/DSL Router with PrintServer has

been tested and complies with the specifications for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used according to the

instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which is found by turn-

ing the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or device

• Connect the equipment to an outlet other than the receiver’s

• Consult a dealer or an experienced radio/TV technician for assistance

UG-BEFW11P1-10110A KL

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

DMZ 36

Routing 38

WAN Port MAC Address 40

The EtherFast Wireless AP

+ Cable/DSL Router’s PrintServer 41

Connecting the PrintServer to Your Network 41

Installing the PrintServer’s Drivers 41

Adding a Printer under Windows 95, 98, and Millennium 44

Adding a Printer under Windows NT 51

Adding a Printer under Windows 2000 57

Troubleshooting 61

Common Problems and Solutions 61

Frequently Asked Questions 63

Appendix 70

How to Ping Your ISP’s E-mail & Web Addresses 70

Installing the TCP/IP Protocol 72

How to Determine Your PCs MAC Address 74

Twisted-Pair Cabling 75

Crimping Your Own Network Cables 76

Glossary 77

Specifications 83

Environmental 84

Warranty Information 85

Contact Information 86

Instant Broadband

Series

Table of Contents

Introduction 1

The Linksys EtherFast Wireless AP

+ Cable/DSL Router with PrintServer 1

Features 1

Package Contents 2

System Requirements 2

Getting to Know the EtherFast

Wireless AP + Cable/DSL Router 3

The Wireless AP + Cable/DSL Router’s Rear Panel 3

The Reset Button 4

The Wireless AP + Cable/DSL Router’s Front Panel LEDs 4

Planning Your Wireless Network 6

Network Topology 6

Roaming 7

Connecting The EtherFast Wireless AP

+ Cable/DSL Router to Your Network 8

Overview 8

About Static & Dynamic IP Addresses 8

Connecting the Wireless AP + Cable/DSL Router & Booting Up 9

The EtherFast Wireless AP

+ Cable/DSL Router’s Web-based Utility 11

Setting Up 11

Basic Setup 12

DHCP Server 15

Device Options 17

Wireless 19

Status 22

Advanced Options 24

Special Applications 24

Access Control: Groups 26

Access Control: PCs 29

Access Control: Filters 32

Virtual Servers 34

Instant Broadband

Series

Introduction

The EtherFast Wireless AP + Cable/DSL Router with PrintServer provides the

ideal solution for connecting your wireless network to a high-speed broadband

Internet connection and a 10/100 Fast Ethernet backbone. Configurable as a

DHCP server for your existing network, the EtherFast Wireless AP +

Cable/DSL Router with PrintServer acts as the only externally recognized

Internet gateway on your local area network (LAN) and serves as an Internet

firewall against unwanted outside intruders. The Router can also be configured

to filter internal users' access to the Internet.

The EtherFast Wireless AP + Cable/DSL Routers provide an operating range of

up to 500 meters (1640 feet), providing seamless roaming throughout your

wireless LAN infrastructure, and its advanced user authentication feature

ensures a high level of network security. The EtherFast Wireless AP +

Cable/DSL Router’s easy to install and easy to use-Windows-based diagnostics

and statistic tools put you in control of your network.

• Fully Compatible with IEEE 802.11b Standard and Supports a High Data

Rate Up to 11 Mbps

• Build a Wireless Broadband Network in Your Home or Small Office with

Just One IP Address

• Create a Natural Firewall to Protect Your PCs From Outside Intruders

• Auto Fallback Data Rate for Long-Distance Communication and Noisy

Environments

• Provides Roaming, Best Access Point Selection, Load Balancing, and

Network Traffic Filtering

• Long Operating Range Supports 150m (Indoors) and 500m (Outdoors)

• Capable of up to 128-Bit WEP Encryption

• Supports IPSec Pass-Thru and PPTP

• Acts as a DHCP Server and a Print Server for Your Existing Network

• Administrators Can Block Specific Internal Users’ Internet Access with

Filtering

• Free Technical Support—24 Hours a Day, 7 Days a Week for North

America Only

• 1-Year Limited Warranty

Features

The Linksys EtherFast Wireless AP + Cable/DSL Router

with PrintServer

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

• One EtherFast Wireless AP + Cable/DSL Router with PrintServer

• One Instant Wireless

Network PC Card

• One Setup CD-ROM (for PrintServer Setup)

• One AC Power Adapter

• One User Guide and Registration Card

• One RJ-45 Broadband Internet connection, with a cable or DSL modem

• One PC with an installed 10Mbps, 100Mbps, or 10/100 Mbps Ethernet card

(optional)

• TCP/IP network adapter protocol for each PC

• UTP network cable with RJ-45 connector

• Microsoft Internet Explorer 4.0 or later, or Netscape Navigator 4.0 or later.

(5.0 and 4.7, respectively, are strongly recommended.)

• Windows 95, 98, Millennium, NT 4.0, or 2000

Package Contents

System Requirements

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

The Reset Button

Briefly pressing the Reset Button will refresh the Wireless AP +

Cable/DSL Router’s connections, potentially clearing any jammed links.

To Reset the Wireless AP + Cable/DSL Router’s factory default settings, power

off the Router and then press the Reset button. Then, power on the Router and

press the Reset button again. This should be done only if you are experiencing

heavy routing problems, and only after you have exhausted all of the other trou-

bleshooting options. By resetting the Wireless AP + Cable/DSL Router, you

run the risk of creating conflicts between your PCs’ actual IP Addresses and

what the Wireless AP + Cable/DSL Router thinks their IP Addresses should be.

You may be forced to reboot the entire system(s).

If the Wireless AP + Cable/DSL Router locks up, simply power it down for 3

to 5 seconds by removing the power cable from the Wireless AP + Cable/DSL

Router’s Power Port. Leaving the power off for too long could result in the

loss of network connections.

The Wireless AP + Cable/DSL Router’s Front Panel LEDs

The LAN Indicators

Power Green. The Power LED illuminates when the Router is pow-

ered on.

Diag Red. The Diag LED illuminates when the Router goes

through its self-diagnosis mode during boot-up. It will turn

off upon successful completion of the diagnosis. If this LED

stays on for an abnormally long period of time, refer to the

Troubleshooting section.

Instant Broadband

Series

Getting to Know the EtherFast

Wireless AP + Cable/DSL Router

The Wireless AP + Cable/DSL Router’s Rear Panel

The rear panel of the Wireless AP + Cable/DSL Router is where all of the connec-

tions are made.

The Wireless AP + Cable/DSL Router’s Ports

WAN The WAN (Wide Area Network) Port is where you will

connect your cable or DSL modem.

PC/Uplink The PC and Uplink ports are shared, which means that

if one is used the other cannot be used. The PC port is

used for connecting the Wireless AP + Cable/DSL

Router to a single PC. The Uplink port is used for con-

necting the Wireless AP + Cable/DSL Router to a net-

work device and will automatically determine the

speed of that device.

PCMCIA The Instant Wireless

Network PC Card is inserted

into the PCMCIA slot to enable the wireless features

of the Wireless AP + Cable/DSL Router. This slot is

not hot swappable.

Printer Connect a printer to the Printer port to use the Wireless

AP + Cable/DSL Router’s PrintServer function.

Power The Power Port is where you will connect the included

AC Power adapter.

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

Planning Your Wireless Network

A wireless LAN is a group of computers, each equipped with one Instant

Wireless

Network PC Card. Computers in a wireless LAN must be config-

ured to share the same radio channel.

Wireless LAN configurations are appropriate for branch level departments or

SOHO operations.

The Instant Wireless

Network PC Card provides access to a wired LAN for

wireless workstations. An integrated wireless and wired LAN is called an

Infrastructure configuration. A group of Instant Wireless

Network PC Card

users and a Wireless AP + Cable/DSL Router compose a Basic Service Set

(BSS). Each PC utilizing an Instant Wireless

Network PC Card in a BSS can

talk to any computer in a wired LAN infrastructure via the Wireless AP +

Cable/DSL Router.

An infrastructure configuration extends the accessibility of an Instant

Wireless

Network PC Card PC to a wired LAN, and doubles the effective

wireless transmission range for two Instant Wireless

Network PC Card PCs.

Since the Wireless AP + Cable/DSL Router is able to forward data within its

BSS, the effective transmission range in an infrastructure LAN is doubled.

The use of a unique ID in a BSS is essential. All PCs using an Instant

Wireless

Network PC Card configured without roaming options in an inde-

pendent BSS must be configured with a BSS ID used in the BSS.

The Wireless LAN Infrastructure configuration is appropriate for enterprise-

scale wireless access to a central database, or as a wireless application for

mobile users.

Network Topology

Instant Broadband

Series

WA N Green. This LED illuminates when a successful connection

is made between the Router and your Broadband device

(such as a modem) or network.

LAN (10/100) Green. The Uplink or PC port will automatically determine

your network’s speed and run accordingly. The 10 and 100

LEDs display the connection speed determined by either

port.

WLAN Green. This LED illuminates when a successful connection

to a wireless network is made.

Printer/Err Red. The Error LED illuminates when there is an error with

the PrintServer. To correct this, clear your print queue. If that

does not work, reset your printer. If that does not work, power

off the Wireless AP + Cable/DSL Router.

Printer/Act Green. The Act LED flickers when the PrintServer is sending

or receiving data.

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

Instant Broadband

Series

Infrastructure mode also supports roaming capabilities for mobile users. More

than one BSS can be configured as an Extended Service Set (ESS). This con-

tinuous network allows users to roam freely within an ESS. All PCs using an

Instant Wireless

Network PC Card within one ESS must be configured with

the same ESS ID and use the same radio channel.

Before enabling an ESS with roaming capability, choosing a feasible radio

channel and optimum position of the Wireless AP + Cable/DSL Routers is rec-

ommended. Proper Wireless AP + Cable/DSL Router positioning combined

with a clear radio signal will greatly enhance performance.

Connecting the EtherFast

Wireless AP + Cable/DSL Routerto

Your Network

Unlike a simple hub or switch, the setup of the Wireless AP + Cable/DSL

Router consists of more than simply plugging everything together. Because the

Router acts as a DHCP server for your Network, you will have to set some val-

ues within the Router, and also configure your networked PCs to accept the IP

Addresses the Router chooses to assign them.

You will need the following values from your ISP in order to install the

Wireless AP + Cable/DSL Router:

• Your broadband-configured

PC’s fixed Internet IP Address

(if applicable)

• Your broadband-configured

PC’s Computer Name and Workgroup Name

• Your Subnet Mask

• Your Default Gateway

• Your Primary DNS IP address

Whoever installed your broadband access should have left this information

with you. If not, call your ISP and they will be able to supply you with it.

Static IP Addresses A Static IP address is an IP address permanently assigned

to a computer in a TCP/IP network. Static IP addresses are usually assigned to

networked devices, which are consistently accessed by multiple users, such as

Server PCs, or printers. If you are using the Router to share your cable or DSL

Internet connection, contact your ISP to see if they have assigned your home or

business a Static IP address. You will need that address during the Router’s con-

figuration.

}

Only if applicable

Overview

About Static & Dynamic IP Addresses

Roaming

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

3. Connect an RJ-45 (network) cable to the Wireless AP + Cable/DSL

Router in either the PC or Uplink port. The PC port is used when con-

necting the Wireless AP + Cable/DSL Router to a single PC and the Uplink

port is used when connecting to a 10/100 Network. Then, connect the other

end of the Ethernet cable to either a PC or a network device. The Wireless

AP + Cable/DSL Router will then be connected to your 10/100 Network.

4. Connect another RJ-45 (network) cable to the Wireless AP + Cable/DSL

Router in the WAN port. The other end of the cable is used to connect the

Wireless AP + Cable/DSL Router to your Cable/DSL modem. Connect to

your Cable/DSL modem at this time.

5. Connect the AC Power Adapter to the Wireless AP + Cable/DSL

Router’s Power Socket. Only use the power adapter supplied with the

Wireless AP + Cable/DSL Router. Use of a different adapter may result in

product damage.

6. Verify that the LEDs are functioning. The Power LED should remain on,

while the Diag LED will flash and turn off right away. If the Diag LED

remains on, there is a hardware error. Refer to the Troubleshooting section

for resolution.

The Hardware Installation is complete.

For directions on connecting your printer to the Wireless AP + Cable/DSL

Router’s PrintServer, see the EtherFast Wireless AP + Cable/DSL Router

section in this user guide.

109

Instant Broadband

Series

Dynamic IP Addresses A dynamic IP address is an IP address that is automati-

cally assigned to a client station (computer, printer, etc.) in a TCP/IP network.

Dynamic IP addresses are typically assigned by a DHCP server on your

Network, which can be a computer on the network or another piece of hard-

ware, such as the Router. A dynamic IP address may change every time your

computer connects to the network.

DHCP (Dynamic Host Configuration Protocol) DHCP automatically assigns IP

addresses to client stations logging onto a TCP/IP network. DHCP eliminates

having to manually assign permanent IP addresses to every device on your net-

work. DHCP typically runs in servers and is also found in network devices such

as Routers.

1. Locate an optimum location for the Wireless AP + Cable/DSL Router.

The best place for your Wireless AP + Cable/DSL Router is usually at the

center of your wireless network, with line of sight to all of your mobile sta-

tions.

2. Insert the Instant Wireless

Network PC Card into the slot. With the

Network PC Card’s 68-pin connector facing the slot in the rear and the

“Network PC Card” label facing up, slide the Network PC Card completely

into the Wireless AP + Cable/DSL Router.

NNoottee::

Some ISPs—most notably some cable providers—

configure their networks so that you do not have to enter a

full Internet address into your web browser or e-mail appli-

cation to reach your home page or receive your e-mail. If

your Internet home page address is something very simple,

such as “www”, rather than “www.linksys.com”, or your e-mail server’s

address is something similar to “e-mail” or “pop3”, rather than

“pop.mail.linksys.com”, you

wwoonn’’tt

be able to properly configure the

Wireless AP + Cable/DSL Router until you determine the actual Internet

addresses of your Web and e-mail connections.

You

mmuusstt

obtain this information prior to connecting the Wireless AP +

Cable/DSL Router to your network. You can obtain this information by con-

tacting your ISP, or turn to the Appendix to learn how to

ping

for an IP

address.

Connecting the Wireless AP + Cable/DSL Router & Booting Up

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

1211

This is the first screen that will appear when you start up the Wireless AP +

Cable/DSL Router’s web-based utility. You can return to this screen at any

time by clicking the Setup button.

Router

This is general information used to identify the Wireless AP + Cable/DSL

Router.

Device Name. This name identifies the Wireless AP + Cable/DSL Router to

your ISP. This is also called the "Hostname". Some ISPs require that you use

the "Hostname" they provide. If so, enter the "Hostname" provided by your ISP.

Basic Setup

Instant Broadband

Series

The EtherFast Wireless AP +

Cable/DSL Router’s Web-based

Utility

To establish a connection from your PC to the Wireless AP + Cable/DSL

Router:

1. After installing the Wireless AP + Cable/DSL Router to your network, start

your PC. If your PC is already running, restart it.

2. Make sure that the TCP/IP protocol has been installed. See the Installing

the TCP/IP Protocol section in the Appendix if you have any questions on

how to do this.

3. Start your WEB browser.

4. In the Address box, enter "HTTP://" and the Wireless AP + Cable/DSL

Router’s IP Address, as in the following example, which uses the default IP

Address: HTTP://192.168.1.1.

The PC accessing the Wireless AP + Cable/DSL Router must have its IP

address set within the range applicable for the Wireless AP + Cable/DSL

Router (192.168.1.2 through 192.168.1.51) and be set at the same Subnet

Mask (255.255.255.0).

5. This will then bring up the Basic Setup screen.

Setting Up

Etherfast

Wireless AP + Cable/DSL Router with PrintServer

DNS IP Address. This is the Wireless AP + Cable/DSL Router’s Domain

Name System address.

• PPPoE (PPP Over Ethernet)

Only enable this checkbox if your ISP uses PPPoE. If your ISP's data does not

mention PPPoE, do NOT enable this checkbox.

Account/User Name. This is the name of the Internet account provided by

your ISP.

Password. Enter the password for the ISP account. Re-enter this password in

the Verify field.

Connect On Demand. Normally, this should be Enabled. If disabled, you

must use the Reconnect button on the Status screen to connect to your ISP.

Disconnect after Idle. After a connection if inactive for longer than the

time period put in this field, the connection will be terminated. If set at

zero, the connection will never be terminated.

When you are ready to save any changes you have made, click the Save but-

ton. To undo any changes before saving, click the Cancel button.

If you have any questions about anything on this screen, click the Help button

to bring up the Help window for this screen.

Instant Broadband

Series

Hardware (MAC) Address. That address which specifically identifies the

Wireless AP + Cable/DSL Router on the WAN port. Some ISPs may require

you to register this address with them.

LAN Port

For most users, the default values for these fields should be satisfactory and

won’t require changing.

• Device IP Address. This is the Wireless AP + Cable/DSL Router’s IP

Address in your Network. Use the default value unless that address is already

used by your Network or your Network is using a different IP Address range.

If the IP Address is already in use, change this value to reflect an unused

address. If your Network is using a different IP Address range, change this

value to fit within the range utilized.

• Network Mask. The default value is set for standard, small networks. For

other networks, use the Network Mask for the segment to which the Wireless

AP + Cable/DSL Router is attached, i.e. the same value as the PCs on that seg-

ment.

WAN Port

• IP Address from ISP - Dynamic IP Address. Leave this enabled if your ISP

allocates an IP Address to the Wireless AP + Cable/DSL Router upon connect-

ing to the Internet.

• IP Address from ISP - Fixed IP Address. Select this if using a fixed (Static)

IP Address. If this option is selected, the following data must be entered:

IP Address. If connecting to an ISP, this is the address allocated by the ISP.

If connecting to another Network, this must be a valid address on that

Network.

Network Mask. This must be compatible with the IP address, as above.

Gateway IP Address. If you are configuring the Wireless AP + Cable/DSL

Router for another network, this would be the default gateway for the other

network. However, if you are configuring the Wireless AP + Cable/DSL

Router to share Internet access, this is your ISP’s IP Address as provided by

your ISP.

Once the correct printer has been selected or the driver’s location has been

specified on your driver disk, click the Next button.

7. At this stage, Windows NT will notify you that a driver has already been

installed for this printer. This is due to an idiosyncrasy in Windows NT.

Though you have not already installed printer drivers, you will want to

select Keep Existing Driver (recommended). DO NOT choose Replace

existing driver. Click the Next button to continue.

5. Now that the port has been configured, click the Next button to continue.

6. The “Add Printer Wizard” will ask you to select the Printer’s Manufacturer

and Model Name in order to select the appropriate driver.

If you have a driver disk that came with your printer, click the Have Disk

button and select the driver’s correct location.

Etherfast

Wireless AP + Cable/DSL Router with PrintServerInstant Broadband

Series

Contact Information

For help with the installation or operation of this product, contact Linksys

Customer Support at one of the phone numbers or Internet addresses below.

Information 800-546-5797 (LINKSYS)

Tech Support 800-326-7114

RMA Issues 949-261-1288

Fax 949-261-8868

Email support@linksys.com

Web http://www.linksys.com

FTP Site ftp.linksys.com

Warranty Information

BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE

FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING.

RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF

PURCHASE.

IN NO EVENT SHALL LINKSYS’LIABILITY EXCEED THE PRICE PAID

FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDEN-

TAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE

OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCU-

MENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PROD-

UCT.

LINKSYS OFFERS CROSS SHIPMENTS, A FASTER PROCESS FOR PRO-

CESSING AND RECEIVING YOUR REPLACEMENT. LINKSYS PAYS

FOR UPS GROUND ONLY. ALL CUSTOMERS LOCATED OUTSIDE OF

THE UNITED STATES OF AMERICA AND CANADA SHALL BE HELD

RESPONSIBLE FOR SHIPPING AND HANDLING CHARGES. PLEASE

CALL LINKSYS FOR MORE DETAILS.

Etherfast

Wireless AP + Cable/DSL Router with PrintServerInstant Broadband

Series

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router Manual

Product: