602207
24
Zoom out
Zoom in
Previous page
1/47
Next page
1. When you see the Welcome screen, click the Next button to continue. This
will bring up the Select Components screen. “User Manual” and “Print Port
Driver” will be selected by default. If either of these is deselected, the
PrintServer drivers will not be installed completely. Click the Next button
to continue.
2. The next screen will ask you to choose a destination location. A default
installation path will appear but you may click the Browse button to choose
a different location. Then, click the Next button to continue.
42
The EtherFast Wireless AP +
Cable/DSL Router’s PrintServer
Connecting the Power
The Wireless AP + Cable/DSL Router’s PrintServer does not have an ON/OFF
power switch. Whenever its AC power adapter is plugged into a power supply,
the PrintServer’s power is on. Make sure that the power adapter is plugged into
the Wireless AP + Cable/DSL Router’s Power Port (on the back panel) and that
the power adapter is plugged into an electrical outlet. The Wireless AP +
Cable/DSL Router’s Power LED should light up green.
Follow the directions for Connecting Everything Together and Booting Up in
the “Connecting the EtherFast Wireless AP + Cable/DSL Router to Your
Network” section.
Connecting the Printer
1. Connect your printer to the Printer port with your printer cable. Some print-
ers, especially bidirectional models, may require special shielded cabling.
Consult your printer’s user guide for cabling specifications.
2. Power on your printer.
You are now ready to install the PrintServer software.
To install the PrintServer drivers, put the Setup CD in your CD-ROM drive. A
window will come up asking you to make sure that your printer and the
Wireless AP + Cable/DSL Router are both connected and powered on.
Verify that this has been done and click the OK button. This will begin the
installation process.
41
Etherfast
®
Wireless AP + Cable/DSL Router with PrintServerInstant Broadband
TM
Series
Installing the PrintServer’s Drivers
Connecting the PrintServer to Your Network
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info