693636

Line 6 POD HD500X Manual

11
Zoom out
Zoom in
Previous page
1/18
Next page
Knob 4 - Sets the Multi-Function knobs to alter the settings on this page
for Amp A or Amp B.
NOTE:WhenscrollingthroughtheAmpModels,you’llseethatwe’ve
also included a complete set of “Preamp” versions of each Amp as well.
You can choose one of these to obtain the tone of just the preamp stage
of the amp. This can be very useful if you want to run your POD HD500X
outputinto anexternal amplier. Deep editingparameters arenot ap-
plicabletothePreampModels.
FX Blocks
For each Preset there are always a total of 8 FX Blocks, each capable
ofloadinganyFXModelsortheFXLoop.WhenintheSignalFlowView
screen, select any FX Block and you’ll see options at the bottom of the
screen,adjustableusingtheMulti-FunctionKnobs1-4.FromtheSignal
Flow View with an FX Block selected Knob 1 - Select from among the
FX Model categories - Dynamics, Distortion, Modulation, Filter, Pitch,
EQ,Delay,Reverb,Vol/Pan,Wah,FXLoop,ornone.Knob 2 - Choose
thedesiredModelfromtheModelTypelist.Knob 3 - Choose from up
to 5 adjustable parameters for the selected FX Model. Alternatively,
double-press the ENTERbuttontodisplaytheEditModescreen,where
allparametersaresimultaneouslyviewablefortheselectedFXModel.
Knob 4 - Adjusts the value for the currently selected parameter.
EachFXBlockalsooersthefollowingfeatures:On/O: Toggle the FX
Block“On” or “O” by pressingthe ENTER button once. Your signal
willstillowthroughtheeect,butwillnotbeprocessedbyit.Move FX
Position: To move any FX Block, start within the Signal Flow View and
select the FX Block to be moved. Press the MOVE button and you’ll see
the selected FX Block appear “raised” to indicate it is now moveable.
Use the 4 Way Nav Pad to move the FX Block to the desired position.
Oncethe FXBlock isin thedesiredPosition, presstheMOVE button
again to drop it into place.
FX Loop
You can select to load the FX Loop in any of the 8 FX blocks. This allows
you to position the POD HD500X hardware FX Loop anywhere you like
within the current Preset’s signal path.
Just as with FX, you can access options for the FX Loop at the bottom of
theSignalFlowView,orintheEditModescreen.Youcanalsotogglethe
FXLoop“On”or“O”bypressingtheENTER button once.
Mixer Block
TheMixerispermanentlypositionedattheendoftheparallelPathsA&
B and provides individual Level and Pan controls for each Paths’ output
beforefedtothe“Post”position.WhentheMixerisselectedintheSignal
Flow View, its four parameters are available at the bottom of the screen,
accessibleusingtheMulti-functionKnobs1-4.
Knob 1 - Volume A controls the volume level of the Path A output. 0 dB
is unity gain.
Knob 2 - Volume B controls the volume level of the Path B output. 0 dB
is unity gain.
Knob 3 - Pan Aadjuststheleft/rightstereobalanceofthePathAoutput.
Knob 4 - Pan Badjuststheleft/rightstereobalanceofthePathBoutput.
Note: Changestothemixerlevelscanaectthewayanyeectsand
amp models are "driven" when placed before them in your signal chain.
For example, turning up the mixer in front of an amp model may cause
the amp's distortion characteristic to change...a testament to the authen-
tic behavior of our amp models.
Expression Pedal Assignment
PODHD500Xincludestwo PedalModes,EXP 1 and EXP 2, each of
whichcanbeassignedtoanyFXModelparameter,orevenanFXLoop
parameter. The EXP 1 and EXP 2PedalModescaneachbeassignedto
control independent FX parameters.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD HD500X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD HD500X in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD HD500X

Line 6 POD HD500X User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info