693636
10
Zoom out
Zoom in
Previous page
1/18
Next page
Editing Amp, Cab & Mic Parameters
WhenanAmpBlockisselected,youcanusetheMulti-functionknobs
1-4toselectAmp,Cabinet,orMicModels.Whenusingadualamp
setup,Knob4allowsyoutoassignwhichampgetscontrolledbythe
DRIVE, VOLUME, and TONE knobs.
Amp Block OFF
A
B
Turn any of the Amp Tone knobs to adjust the desired settings for the
selected Amp.
Whenever you adjust any of the Amp Tone knobs, you’ll see the
“Momentary”AMP: EDIT LCD screen temporarily displayed, showing the
actualvaluesoftheToneknobsforbothcurrentAmpA&AmpBModels.
Or, to manually display the AMP:EDIT screens, double-press the ENTER
buttonwhenanAmpModelisselected.You’llseethescreen’srespective
controls adjust as you adjust the DRIVE, VOLUME, and TONE knobs.
The black “dots” around each knob indicate its last-saved value. With an
AmpBlockoyou’llseeonlyaVOLknob.Thisisaseparateparameter
strictly for the Amp Model’s Bypass Volume. Use the VOLUME knob
on your device to adjust this, and its value is stored separately with the
Preset for whenever the Amp Block is Bypassed.
YoucanusetheAmpModeldeepeditparameterstocompletelychange
the behavior of any amp model from subtle to extreme. It's like having your
very own amp techinician by your side. From page 1 of the AMP:EDIT
screen, press the 4 Way Nav Pad right arrow button to view page 2.
Knob 1 - MASTERsetstheamountofpowerampdistortion.Thispa-
rameter is highly interactive with all deep edit parameters.
Knob 2 - SetstheamountofSAGinthepoweramp.Athighersettings
the model becomes "squishy" with more touch sensitivity and improved
sustain.
Knob 3 - Controls how much heater hum and AC ripple interacts with
your tone. At maximum setting things get really freaky - you've been
warned.
Knob 4 - Sets the Multi-Function knobs to alter the settings on this
page for Amp A or Amp B.
Press the 4 Way Nav Pad right arrow button again to view page 3.
Knob 1 - Adjusts the bias of the power tubes. At maximum the amp is op-
erating in Class A. Set to minimum you get a very "cold" Class AB biasing.
Knob 2 - Bias Excursion is a phenomenon that occurs only as the
power tubes are pushed. Set low for a tighter feel. Set high for more
tube compression (Note: Turn DRIVE&MASTERuptoexperiencethis
phenomenon).
Knob 4 - Sets the Multi-Function knobs to alter the settings on this
page for Amp A or Amp B.
Press the 4 Way Nav Pad right arrow button one more time to view page 4.
Knob 1 - Sets the amount of "early reflections." Higher settings add more
reflective room sound to your tone.
Knob 2 - Turn to change Cabinet Models .
Knob 3 - Selects Microphone type.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD HD500X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD HD500X in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD HD500X

Line 6 POD HD500X User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info