Manual Line 6 Firehawk FX (page 6 of 16) (English)

693634

Zoom out

Zoom in

1/16

5. FX Footswitches - Footswitches (FS1–FS5) toggle the FX Blocks

On or O, just like a board full of analog pedals. Each footswitch can

be assigned to a dierent FX Block per Preset, as indicated by the

colored LED surrounding each footswitch. The LED colors indicate:

Yellow (Compressor & Stomp), Blue (Modulation), Purple (Synth),

Green (Delay), Orange (Reverb), White (Looper) and Turquoise (FX

Loop). When pressing one of these footswitches, you’ll also see its

assigned Block description and On/O state momentarily shown

in the LCD display. All FS1–FS5 footswitch assignments can be

created and edited using the Firehawk Remote app. See the

following Firehawk Remote App section for details.

6. Preset & Bank Select Footswitches - Firehawk FX comes loaded

with 128 Presets, comprised of 4 Preset locations (A–D) stored

within each of the Banks (1–32). The LCD display shows the Bank

number, location and title of the currently loaded Preset.

01B Lead

the

Way

LCD display showing Bank, Preset location and title

Each Preset stores all of the Amp and FX parameter settings that

dene the characteristics of the tone, Footswitch & Controller

assignments and FX Loop settings. Use the Bank and Preset Select

footswitches to load and save Presets on Firehawk FX.

NOTE: An unlimited number of Presets can be downloaded, created,

edited, saved and rearranged on your device using the mobile app!

See more details in the following Firehawk Remote App section.

To Load a Preset: Press one of the four Preset Select footswitches

(A–D) to load the Preset within the current Bank. The red LED around

the footswitch indicates your current selection.

To Load a Preset that Resides in a Dierent Bank: Select the

Bank, then choose the Preset Select footswitch. Use the Bank Up 

and Bank Down  footswitches to navigate through Banks. Once

you’ve reached the desired Bank (as indicated in the ashing LCD

Display) press one of the Preset Select footswitches (A–D) to load

the desired Preset within the Bank. The Bank select functionality will

time out after 5 seconds if no footswitch is selected.

Preset Status Indicator: Whenever you change an Amp or FX

setting from its original value, a dot appears between the Preset's

location number and title within the LCD Display indicating that the

Preset is now in an “unsaved” state. You’ll want to Save to retain

your changes to the Preset.

05C

Tone 4 Days

A "dot" indicates an "unsaved" Preset state

To Save a Preset: Press and hold the lit footswitch that indicates

your current selection to enter Save Mode. An arrow character

appears at the left of the LCD Display and the entire display ashes

to indicate you are in Save Mode. To exit Save Mode without making

any changes, wait 5 seconds without touching any controls and the

process will time out and exit automatically.

05CTone 4 Days Days

A ashing display and an "arrow" at the left indicates Save Mode

To Save the Edited Preset to the Preset’s Existing Location:

Simply press and hold the same Preset Select footswitch again.

Once the display stops ashing, your edited settings are saved,

overwriting the former Preset in the location.

To Save to a Dierent Bank and Preset Location: While in Save

Mode, navigate to the desired Bank and Preset location by tapping

the Bank Up/Bank Down footswitch, and then tapping the Preset

Select footswitch for your preferred Preset location. The location

number and title of the Preset that currently resides in this location is

shown in the ashing LCD Display. Press and hold the Preset Select

footswitch assigned to this location to replace the location’s current

Preset with your edited Preset. The LCD will stop ashing and the

title of your new, saved Preset will be displayed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 Firehawk FX in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 Firehawk FX

Line 6 Firehawk FX User Manual - Dutch - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Line 6 Firehawk FX Manual

Product: