668742
22
Zoom out
Zoom in
Previous page
1/31
Next page
19
CONTROL SOLUTION TESTING
Press so that the control solution test symbol CtL appears in the upper right corner of the
display. You must mark the test before you apply control solution. Once you have completed
the test, you cannot change the marking. The meter is now ready to perform a control solution
test. If you decide not to do a control solution test, press again to remove CtL from the
display.
Prepare and apply control solution
Shake the control solution vial before each test. Remove the cap and squeeze the vial to
discard the rst drop. Then wipe the tip with a clean tissue or cloth. Hold the vial upside
down and gently squeeze a hanging drop. Touch and hold the hanging drop of control
solution to the narrow channel in the top edge of the test strip. Make sure the conrmation
window lls completely. Control solution should not be applied to the at face of the test
strip.
Read your result
When the conrmation window is full, the meter will count down from 5 to 1. Your result
will then appear on the display, along with CtL and the unit of measure.
Check if the result is in range
Compare the result displayed on the meter to the control solution range printed on the test strip vial. Each vial of
test strips may have a dierent control solution range. If the results you get are not within this range, the meter and
test strips may not be working properly. Repeat the control solution test.
Out-of-range results may be due to:
• not following the instructions detailed in steps 1–7,
• expired or contaminated control solution,
• expired or damaged test strip,
• use of a test strip or control solution past its discard date, or
• a problem with the meter.
CAUTION: The control solution range printed on the test strip vial is for OneTouch® Ultra® Control Solution only. It is not a recommended
range for your blood glucose level.
CAUTION: If you continue to get control solution results that fall outside the range printed on the test strip vial, Do Not use the meter,
the test strips, or the control solution. Call LifeScan Customer Service at 1 800 227-8862 (available 24 hours a day, seven days a week).
Conrmation
Window
100-135 mg/dL
(Example)
Top
Edge
Narrow Channel
Apply drop here
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeScan OneTouch UltraMini - Blood Glucose Monitoring System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeScan OneTouch UltraMini - Blood Glucose Monitoring System in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info